Channel Search; Clock - Digiality T-2000 FTA User Manual

9. Channel search

10. Clock

12
After the setting of the
SCART output, the receiver
will start searching for chan-
nels. The search can take up
to 10 minutes.
Press GREEN for next menu.
The receiver has a clock that
shows the actual time and
that is used for programming
recordings. The receiver will
suggest the correct settings,
but you might need to make
some changes.
Time zone
The receiver will suggest the
correct time zone, but you
might need to change this
setting if you have chosen
another menu language than
the language of the country
that you are situated in.
Summer time
If the receiver should auto-
matically change to summer
time, Automatic must be
chosen.
Updating channel
The receiver will automati-
GREEN GREEN
cally choose an updating
channel. This channel
should only be changed, if
the operator informs you to
change it.
Press the GREEN button to
save the changes.
Congratulations you have now installed your receiver and
it is ready for use. On the next pages you can see, how to
operate the receiver.
DIGIALITY T-2000 FTA / T-2001 CX