Display Settings; Using The Backlight; Using The Screen Saver; Date Settings - Sony SR-R4 Operation Manual

Display Settings

You can make settings for backlight use in dark
locations, screen saver, etc.

Using the Backlight

Setting the LIGHT switch to ON turns the
backlight on.
dB SDI SDI SDI SDI SDI SDI SDI SDI SDI SDI SDI SDI SDI SDI SDI SDI
0
-10
HOME
-20
-30
-60
TC EMP EMP EMP EMP EMP EMP EMP EMP EMP EMP EMP EMP EMP EMP EMP EMP
EE
L R L R L R L R L R L R L R L R L R L R L R L R L R L R L R L R
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
SR-R4:CAM
VIDEO STOP
TCG KEYINHI
00 00 00 00 RECINHI
AUDIO
H M S F
IN DLY: TC AU MK: --:--:--:--
SYSTEM FILENAME:(NEXT)A001C001_120530RT
LOCAL
ENCODE F65RAW
16.5V REMAIN
F65RAW-SQ 23.98P EE
5min
17:11
Adjusting the backlight brightness
Access the SYSTEM Setup menu and select LCD
> BRIGHT (see page 59). The Backlight
Brightness window appears, letting you adjust the
setting.
Turning the backlight off after a period of
inactivity
Access the SYSTEM Setup and select LCD >
LIGHT OFF (see page 59). The Backlight Off
Timer window appears, letting you adjust the
backlight activation duration. The setting range is
5 seconds to 5 minutes. To disable automatic
backlight deactivation, select "Disable."
Default setting: Disable

Using the Screen Saver

Access the SYSTEM Setup menu and select LCD
>SAVER (see page 59). The Screen Saver
window appears, letting you adjust the wait
interval until the screen saver is activated. The
setting range is 1 minute to 1 hour. To disable the
screen saver, select "Disable."
Default setting: Disable
LIGHT switch
KEY INHI
OFF ON
SELECT/ENTER
LIGHT
BACK
OFF ON
ADJUST
EJECT STOP PLAY REC
Z x B z
REW F FWD PAUSE
FUNC
m M X

Date Settings

Display the System menu and select OTHERS
>SET DATE menu to set the date and time of the
unit.
To set the date and time (OTHERS >SET
DATE menu)
1
Display the System menu, and then
select and confirm "OTHERS" t
select and confirm "SET DATE."
2
Set the year, month, day, local time, and
UTC (Coordinated Universal Time)
offset (e.g., +9:00 for Japan), and then
select and confirm [SET].
Note
Time information is recorded to SRMemory cards in
UTC format and is displayed using the offset value as its
base.
Display Settings / Date Settings
27