2. Remove the cabinet assy and the plasma panel fastening
, ×6
screws (×8
).
3. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
4. Remove the spacers and spacer rings (×6
7.23. Remove the S-Board
1. Remove the Cabinet assy. (See section 7.22.)
2. Disconnect the connector (S2).
3. Remove the screws (×2
metal frame.
4. Remove the screws (×2
).
7.24. Remove the K-Board
1. Remove the Cabinet assy. (See section 7.22.)
2. Remove the S-Board. (See section 7.23.)
3. Remove the screws (×2
4. Disconnect the connector (K1) and Remove the K-Board.
23
) and remove the S-Board
) and remove the S-Board.
).