Disassembly And Assembly Instructions; Remove The Rear Cover; Remove The P-Board; Remove The Side Terminal Cover And Rear Terminal Cover - Panasonic TX-P42S10B Service Manual

8 Disassembly and Assembly Instructions

8.1.

Remove the Rear cover

1. See Service Hint (Section 3)
8.2.

Remove the P-Board

Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P2, P6, P7, P9, P11, P25,
P34 and P35).
3. Remove the screws (×9 ) and remove the P-Board.
8.3. Remove the Side terminal
cover and Rear terminal cover
1. Remove the claw (×1
2. Remove the Side terminal cover.
3. Remove the Adjustment cover.
4. Remove the screws (×4
5. Remove the Rear terminal cover.
20
).
, ×3 , ×2
).