Hydraulic Unit; Remote Hydraulic Control System; Remote Control Valve; Remote Control Valve Lever - Kubota M6040 Operator's Manual

14

HYDRAULIC UNIT

HYDRAULIC UNIT

REMOTE HYDRAULIC CONTROL SYSTEM

The hydraulic auxiliary control valves can be installed up
to triple segments.
It is not possible to use triple segments with flow control
valve.
BRemote Control Valve
There are three types of remote valves available for these
models.
A Double acting valve with detents and self cancelling:
This valve may be placed in the detent mode. The
lever will stay in this position until the pressure reaches
a predetermined level or a cylinder reaches the end of
its stroke. Then it will automatically return to neutral.
A Double acting valve with float position:
This valve may be placed in the float mode with the
control lever all the way forward. The cylinder is free to
extend or retract, letting an implement such as a
loader bucket follow the ground.
A Single/double acting valve:
This valve can be utilized as single or double acting
valve by adjusting the auxiliary control valve selector
knob located on the valve.
1) Turn the auxiliary control valve selector knob
clockwise all the way to utilize as single acting
valve.
2) Turn the auxiliary control valve selector knob
anticlockwise all the way to utilize as double
acting valve.
(1) Single / double acting valve
(2) Auxiliary control valve
selector knob
BRemote Control Valve Lever
The remote control valve lever directs pressurized oil flow
to the implement hydraulic system.

(1) Remote control valve lever 1

(2) Remote control valve lever 2
(3) Remote control valve lever 3
(A) Double acting
(B) Single acting
(A) "PUSH"
(B) "PULL"