1. Manuals
  2. Brands
  3. e2v Manuals
  4. Security Camera
  5. AVIIVA EM1
  6. User manual

e2v AVIIVA EM1 User Manual

Line scan monochrome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AVIIVA EM1
Line Scan Monochrome Camera

User Manual

1
e2v semiconductors SAS 2011
1043D - AVIIVA EM1 –04/11

Advertisement

Table of Contents
loading

Related Manuals for e2v AVIIVA EM1

Summary of Contents for e2v AVIIVA EM1

  • Page 1: User Manual

    AVIIVA EM1 Line Scan Monochrome Camera User Manual e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 2: Table Of Contents

    5.1.1 Out of the box ..................................17 Setting up in the system........................18 CAMERA SOFTWARE INTERFACE ............19 GigE Vision concepts ..........................19 6.1.1 GenICam....................................19 6.1.2 GenICam Standard ................................19 6.1.3 SFNC ......................................19 e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 3 512 Pixels ....................................65 7.3.2 1024 Pixels ....................................65 7.3.3 2048 Pixels....................................66 7.3.4 4096 Pixels....................................66 APPENDIX B : Thermal Management ............67 Heat Sinks .............................. 67 Temperature dropping ......................... 68 Performance curves versus Temperature..................69 e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 4 Line Scan Camera APPENDIX C : Optical Mounts available ............. 71 F-Mount..............................71 C-Mount..............................72 T2 & M42x1 Mounts ..........................73 APPENDIX E : Index ............... 74 APPENDIX E : Revision History............76 e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 5: Aviiva® Em1

    Max line rate – (in 12 bits) Radiometric Performance at Maximum Pixel Rate and minimum camera gain Bit depth 8, 12 Bits Response LSB/(nJ/cm²) 117500 Full Well Capacity electrons Response non linearity +/- 0.3 PRNU Dynamic range e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 6: Oct/Spectrometer Versions (Ba9)

    < 11 Low power mode < 5 General Features Operating temperature 0 to 55 (front face) or 70 (Internal) °C Storage temperature -40 to 70 °C Regulatory CE, FCC and RoHS compliant e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 7: Description

    AVIIVA® EM1 Description The AVIIVA EM1 is designed to set new standards for line scan cameras in term of speed and image quality. With resolutions of up to 4096 pixels, and the design of new CCD image sensors, it delivers state of the art performance, without compromises.

  • Page 8: Camera Performances

    Figures in LSB are for a 12bits format. Stabilized temperature 30/40/55 °C (Room/Front Measured at exposure time = 100µs Face/Internal) Light source : R, G, B LEDs Combination SNR Calculated at 75% Vsat with minimum Gain. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 9: Image Sensor

    20µm height for the 10µm pitch. 28µm height for the 14µm pitch. A custom height (up to 100µm for the 10µm pitch and 50µm for the 14µm are possible on demand : Contact your sales Office. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 10: Response & Qe Curves

    AVIIVA® EM1 2.3 Response & QE curves 2.3.1 Quantum Efficiency QE(%) 1000 1100 2.3.2 Spectral Response Response LSB /nJ/cm² 14µ BA0 10µ BA0 14µ BA9 10µ BA9 Wavelength (nm) 1000 1100 e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 11: Camera Hardware Interface

    AVIIVA® EM1 CAMERA HARDWARE INTERFACE Mechanical Drawings e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 12: Input/Output Connectors And Led

    512 14µm X = 24.41mm Y = 30mm ±100 µm Planarity ±35 µm Rotation (X,Y plan) ±0,2° Tilt (versus lens mounting plane) ±35µm Reference corner First Pixel 3.2 Input/output Connectors and LED e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 13: Status Led Behaviour

    EM1 4kx10µm 0,81A 0,43A In standby mode at 24V Power = around 5W Current = 0,208A -0,003 -0,002 -0,001 0,001 0,002 0,003 0,004 0,005 Times (s) Power up Time Around 40s e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 14: Gpio Connector

    1 2 3 4 5 6 7 8 9 10 11 12 47Ω 47Ω 22Ω • Absolute maximum rating of I/O block : Minimum voltage Maximum voltage Peak current Outputs -12V +15V 180mA Input +12V e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 15: Giga Ethernet Output

    (For short distance, a cat.5E cable can be used.) • Ethernet connection : Signal Signal MDI_0+ MDI_2- MDI_0- MDI_1- MDI_1+ MDI_3+ MDI_2+ MDI_3- EM1 camera works only with a transfer rate of 1Gbit/s in full duplex mode. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 16: Standard Conformity

    4.2 FCC Conformity The AVIIVA EM1 cameras further comply with Part 15 of the FCC rules, which states that: Operation is subject to the following two conditions:...

  • Page 17: Getting Started

    On the appropriate Camera Page (EM1) you’ll find a download link first version of CommCam compliant is indicated in the last Chapter PureGeV package and its documentation requires a login/password : Login : pleora Password : vercors e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 18: Setting Up In The System

    If you use a 60mm lens, the working distance will be : L = (60 x 110) / 40,96 = 161mm. This will certainly require a macro lens. CCD Plan Focal Plan e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 19: Camera Software Interface

    The SNFC 1.3 is available in the documentation pack of this Camera : You’ll find all the complementary details which could miss you in this manual. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 20: Getting Started With Gige Vision Interface

    A PureGEV license is included in camera package. Refer to PureGEV installation manual for instructions. The following assumes Pleora's PureGEV is installed. To keep things simple, the firewall should be temporary turned off. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 21: Interactive Camera Control

    AVIIVA® EM1 6.2.3 Interactive camera control PureGEV Player is used to control camera interactively and display images : "Select / Connect" button opens the GEV Device Selection window. GigE cameras appears. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 22 Guru : Advanced feature that might bring the camera into a state where it will not work properly anymore if it is set incorrectly for the current mode operation. Click "Play" to start grab. Check camera image on display. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 23: Camera Commands

    In the following Chapters, you will find the details of the GEV Device Control Menu, relative to the Camera configuration. The Image Stream Control and Communication Control menus are dedicated to GeVPlayer configuration and are explained in the corresponding documentation. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 24: How To Read The Tables Of Parameters Below

    = “DigitalTap4 Gain Value” (Gain Tap4 setting) DigitalTap4 Gain = “DigitalAll Gain Value” (Digital Gain setting) DigitalAll Gain Blue The contextual parameters (in ) can have all the same type of the standard ones (IInteger …) e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 25: Transportlayercontrol

    All GigE Vision features start with the “Gev” prefix. GigE Vision registers are 32-bit. If a GigE Vision register has multiple fields within this 32-bit, then they are separated in multiple features. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 26 Indicates the persistent default GevPersistentDefaultGateway IInteger gateway for this network interface. Indicates the speed of transmission GevLinkSpeed IInteger negotiated by the given network Interface in MBytes/s e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 27 Indicates the maximum randomized GevDiscoveryAckDelay IInteger R/(W) delay the device will wait to acknowledge a discovery command in ms Enables genereation of extended status GevGVCPExtendedStatusCodes IBoolean codes. GevGVCPHeartbeatDisable IBoolean Disables the GVCP heartbeat. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 28 PayloadSize will be transferred for each image. This number covers all kind of data coming with the image, e.g. stamps etc. If the user allocates PayloadSize for each buffer he is insured that each frame will fit into his target buffers. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 29: Devicecontrol

    Byte/s Perform the validation of the current DeviceRegistersCheck ICommand (R)/W register set for consistency. Returns if the current register set is DeviceRegistersValid IBoolean valid and consistent. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 30: Imageformatcontrol

    Depends on PixelFormat. Bpp8 Bpp12 Type of color filter that is applied to PixelColorFilter IEnumeration the image. Always None PixelFormat IEnumeration Format of the pixel to use for acquisition. Mono8 Mono12 e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 31 EndOfLineData : The User can put 2 words of 32bits each in addition at the end of each pixel line data. These words can be designed as the output of the two Counters or the two timers. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 32: Privilege (Non Sfnc)

    They can be locked in User mode and a specific password is required to switch back the Camera in Integrator mode. This password can be generated with a specific tool available from the hotline (hotline-cam@e2v.com) None of these parameters and Section are defined with the SNFC.
  • Page 33 But it’s necessary to grab an image of about 100 lines because these first lines after the Sensor Power down don’t have correct level (due Time (mn) establishment of the black reference level. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 34: Acquisitioncontrol

    AcquisitionLinePeriod controls the period of each Line. The AcquisitionLineRate is calculated from this value. AcquisitionStatusSelector and AcquisitionStatus can be used to read the status of the internal acquisition signals. standard acquisition signals Status are: AcquisitionTriggerWait, AcquisitionActive, FrameTriggerWait, FrameActive, e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 35 IEnumeration NON SFNC ContinuousTimedMode Sets automatically the camera in a list of Pre-selected Trigger modes TriggeredTimedMode equivalent to the existing CameraLink TriggeredTimedModeWithFrameTrigger versions of e2v Cameras. See below for TriggeredWidthMode details of each mode. TriggeredWidthModeWithFrameTrigger ITCMaxMode ITCMaxModeWithFrameTrigger ITCMode ITCModeWithFrameTrigger e2v semiconductors SAS 2011...
  • Page 36 Specifies the delay in microseconds (us) to apply after the trigger reception before activating it. TriggerDivider IInteger Specifies a division factor for the incoming trigger pulses. TriggerSoftware ICommand Not available TLParamsLocked IBoolean e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 37: Trigger Presets

    Exposure time defined with Exposure Time feature. Frame started with Line 2 trigger Parameter Value AcquisitionMode Continuous ExposureMode Timed TriggerSelector "All values" TriggerMode TriggerSelector FrameActive TriggerMode TriggerSource Line2 TriggerActivation LevelHigh TriggerSelector ExposureStart TriggerMode TriggerSource Line0 TriggerActivation RisingEdge e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 38 The Frame is valid on the high level of the Line 2 trigger Parameter Value AcquisitionMode Continuous ExposureMode TriggerWidth TriggerSelector "All values" TriggerMode TriggerSelector FrameActive TriggerMode TriggerSource Line2 TriggerActivation LevelHigh TriggerSelector ExposureActive TriggerMode TriggerSource Line0 TriggerActivation LevelHigh e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 39 "All values" TriggerMode TriggerSelector FrameActive TriggerMode TriggerSource Line2 TriggerActivation LevelHigh TriggerSelector ExposureStart TriggerMode TriggerSource Timer1End TriggerActivation RisingEdge TriggerSelector ExposureEnd TriggerMode TriggerSource Line0 TriggerActivation RisingEdge TimerSelector Timer1 TimerTriggerSource Line0 TimerTriggerActivation RisingEdge TimerDelayAbs TimerDurationAbs e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 40 Line1 TriggerActivation RisingEdge In any preset mode using a trigger: if the trigger source is no more active the AcquisitionAbort feature is required to switch back to the Continuous Timed mode e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 41: Digitaliocontrol

    0.7µs. LineStatus IBoolean Returns the current status of the selected input or output Line. LineFormat IEnumeration Controls the current electrical format of the selected physical input or output Line. LVDS RS422 e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 42 Sets the value of all the bits of the User Output register. UserOutputValueAllMask IInteger Sets the write mask to apply to the value specified by UserOutputValueAll before writing it in the User Output register. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 43: Counterandtimercontrol

    Timer can also be used to generate a timed strobe pulse with an optional delay before activation. In AVIIVA EM1 camera, 2 x Counters and 2 x Timers are available and are used in different applications: A Counter is used to count internal events.
  • Page 44 Reset Source signal. RisingEdge FallingEdge AnyEdge LevelHigh LevelLow CounterReset ICommand (R)/W Does a software reset of the selected counter. CounterValue IInteger Reads or writes the current value of the selected counter. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 45 Sets the duration (in µs) of the Timer pulse. TimerDelay IFloat Sets the duration (in µs) of the delay to apply at the reception of a trigger before to start the Timer. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 46 Interface Access Visibility Description TimerValue IFloat Reads or writes the current value (in µs) of the selected Timer. TimerStatus IEnumeration Returns the current state of the Timer. TimerIdle TimerTriggerWait TimerActive TimerCompleted e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 47: Analogcontrol

    Abort for function GainAutoBalance only for NI driver. NIBlackLevelAutoBalanceCtrl ICommand Same as BlackLevelAutoBalance but for NI (National Instruments) driver. Compatibility issue. NIBlackLevelAutoBalanceAbort ICommand Abort for function BlackLevelAutoBalance only for NI driver. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 48 Each change of Preamp Gain value loads automatically the associated values of the Tap balance (Gain and offset for each sensor tap). This action takes more time than simply changing the Amplification Gain e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 49: Analog Gain

    BlackLevelRaw BlackLevelSelector Digital Offset ( with • Value from –4096 to +4095 in LSB The Contrast Expansion (both Digital Gain & Offset) will be automatically disabled if the LUT is enabled.. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 50: Tap Balance

    Right projection Left projection Average area Average area Average distance area width The adjustment between these two neighbor taps is calculated to cancel the difference between the two projections (right and left). e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 51: Flatfieldcorrectioncontrol

    Underflow” because some pixels have been detected as too high or too low in the source image to be corrected efficiently. The Calculation result will be proposed anyway as it’s just a warning message. The Status Register is changed and displayed in “Status” section (detailed chap §6.4.5) e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 52 Save the current FFC FFCSetLoad ICommand Load the FFC in the memory defined by FFCSelector in the current FFC. CurrentFFCSet IInteger Indicates the last FFC memory has been Saved/loaded and is active e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 53 User. When the FFC result is saved in memory, the adjust gain and target are saved in the same time in order to associate this gain value with the FFC result. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 54 The user target and Gain are saved with the associated FFC in the same memory. Advices The AVIIVA EM1 Cameras have 4 x FFC Banks to save 4 x different FFC calibrations. You can use this feature if your system needs some different conditions of lightning and/or Gain because of the inspection of different objects : You can perform one FFC per condition of Gain/setting of the Camera ( 4 Max) and recall one of the four global settings (Camera Configuration + FFC + Line Balance) when required.
  • Page 55 RAM Save Reset a User bank : User1 Ram Memory - Reset the RAM Load User2 (FPN/PRNU individually) User3 - Save in the bank to User4 reset Reset FPN Reset PRNU e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 56: Lutcontrol

    Save the current LUT LUTSetLoad ICommand Load the LUT in the memory defined by LUTSelector in the current LUT. CurrentLUTSet IInteger Indicates the last LUT memory has been Saved/loaded and is active e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 57 At the power up : Save Ram Memory : - Last User Bank used User1 Current LUT (CurrentLUTSet) is loaded Load User2 in RAM User3 reset User4 Access LUT by index e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 58: Statistics And Line Profile

    If PixelROIStart + PixelROIWidth > SensorWidth, then end of the ROI is set at : PixelROIStart + PixelROIWidth - SensorWidth It’s the way to define a ROI composed of 2 x strips at the two sides of the sensor line : SensorROIStart SensorWidth e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 59 (2 bytes) PixelValueAllIndex IInteger Control the index (offset) of the Pixel to access in the ROI PixelValue IInteger Returns the Value of the Pixel in the ROI pointed by PixelAllValueIndex e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 60: Saverestoresettings

    The integrator bank (5) can be written only if the Camera is set in integrator mode (Privilege level = 1). This integrator bank can be used as a « Factory default » by a system integrator. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 61: Freearea

    Control the index of each value to access in The User Memory area UserMemoryValue IInteger Returns the data of the User Memory area pointed by UserMemoryAllValueIndex UserMemorySave ICommand Save the User Memory in EEPROM e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 62: Packet_Resend Mechanism

    AVIIVA® EM1 Packet_Resend mechanism The AVIIVA EM1 camera embeds a dedicated memory to store the data frames in order to be able to resend packets when requested by the host driver. If the host driver detects that one or multiple packets are missing then resend request commands are sent to the camera.

  • Page 63: Appendix A : Test Patterns

    7.2 Test Pattern 2 : In 8 bits format 7.2.1 512 Pixels Pixel : … Value : … 7.2.2 1024 Pixels Pixel : … 1020 1021 1022 1023 1024 Value : … e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 64: 2048 Pixels

    Pixel : … … 2040 2041 … 2047 2048 Value : … … … 7.2.4 4096 Pixels Pixel : … … 4080 4081 … 4095 4096 Value : … … … e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 65: Test Pattern 2 : In 12 Bits Format

    AVIIVA® EM1 7.3 Test Pattern 2 : In 12 bits format 7.3.1 512 Pixels Pixel : … … Value : … 2040 2055 2063 … 4079 4087 4095 7.3.2 1024 Pixels e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 66: 2048 Pixels

    2048 Value : … 2046 2049 2051 … 4089 4091 4093 4095 7.3.4 4096 Pixels Pixel : … 4092 4093 4094 4095 4096 Value : … 4091 4092 4093 4094 4095 e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 67: Appendix B : Thermal Management

    (set of 2) and they can be fixed on any side of the front face : Set of 2 x Heat Sinks : Part number AT71KFPAVIVA-CAA One heat sink can decrease the temperature of the front face of about 5°C down. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 68: Temperature Dropping

    The ambient temperature is necessary defined here as a pulsed air or with an air flow around the camera otherwise the temperature around the Camera is not homogeneous and can be much more important than the one measured in the room. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 69: Performance Curves Versus Temperature

    The Cameras tuning is done in factory after a certain time of warm up (close to a “normal condition of use) in order to ensure that the Camera will give its best while runing 24h a day. This explains a slight decreasing of the noise when the temperature rises up. e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 70 Camera Temperature (°C) Average Offset vs Temperature : At min preamp Gain value (-24dB) FPN p-p vs. Temperature Camera Temperature (°C) FPN peak-peak vs Temperature : At min preamp Gain value (-24dB) e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 71: Appendix C : Optical Mounts Available

    AVIIVA® EM1 APPENDIX C : Optical Mounts available F-Mount F Mount : Kit10 (Part number AT71KFPAVIVA-ABA) e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 72: C-Mount

    AVIIVA® EM1 9.2 C-Mount e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 73: T2 & M42X1 Mounts

    AVIIVA® EM1 9.3 T2 & M42x1 Mounts M42x0,75 (T2 Mount) : Kit30 (Part number AT71KFPAVIVA-AKA) M42x1 Mount : Kit40 (Part number AT71KFPAVIVA-ADA) e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 74: Appendix E : Index

    EnableEndOfLineData0Source, 31 GevPersistentSubnetMask, 26 ExposureMode, 35 GevPrimaryApplicationIPAddress, 28 ExposureTime, 35 GevPrimaryApplicationSocket, 28 FFCAdjust, 52 GevSCDA, 28 FFCAdjustTarget, 52 GevSCPD, 28 FFCCalibrationAbort, 52 GevSCPHostPort, 28 FFCCalibrationCtrl, 52 GevSCPInterfaceIndex, 28 FFCEnable, 52 GevSCPSBigEndian, 28 e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 75 PayloadSize, 28 UserOutputValue, 42 PixelAccessLineNumber, 59 UserOutputValueAll, 42 PixelCoding, 30 UserOutputValueAllMask, 42 PixelColorFilter, 30 UserSetLoad, 60 PixelFormat, 30 UserSetSave, 60 PixelROIMax, 59 UserSetSelector, 60 PixelROIMean, 59 Width, 30 PixelROIMin, 59 WidthMax, 30 e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...

  • Page 76: Appendix E : Revision History

    “How to read Parameter Tables ?” Insert. EM1 2010 BA9 1.3.9 Pattern Tests EM1 1014 BA0 1.1.1 C-Mount EM1 1014 BA9 1.0.1 EM1 0514 BA0 1.0.1 1043D Lock Status for each Parameter All versions e2v semiconductors SAS 2011 1043D - AVIIVA EM1 –04/11...
  • Page 77 Whilst e2v has taken care to ensure the accuracy of the information contained herein it accepts no responsibility for the consequences of any use thereof and also reserves the right to change the specification of goods without notice. e2v accepts no liability beyond that set out in its standard conditions of sale in respect of infringement of third party patents arising from the use of tubes or other devices in accordance with information contained herein.

Table of Contents