TTS Easi-Speak PRO User Manual page 6

Easi-Speak PRO User Guide
Recording & Playing your First Track
• Switch on the Easi-Speak PRO by sliding the On-Off
switch until the Status LED lights Orange (steady or
flashing), indicating it is waiting in standby
• Press and release the Record button (Red ring). After a
second or so, the Status LED will change to Red
indicating it is recording
• Speak or sing clearly into the top of the microphone
about 15cm to 30cm away for at least 2 seconds
• The recording can be paused at any time by pressing
the Record button briefly. The Status LED will flash
to show the recording has been paused. Simply press
the Record button again to continue recording
• When you are finished Recording, press the Record
button, and hold for 2 seconds, to stop the recording
and save it as the last track. The Status LED will
change to Orange (steady or flashing)
• Alternatively you can press and hold the Record
button during the whole of the recording and release it
when you have finished recording
• Press the Play button (Green ring) to play your track.
The Status LED will light Green while the track is
playing
6
Primary ICT Ltd - www.primaryict.co.uk