Advertisement
Before Use
●This chair is delivered with the backrest folded down.
Before use, raise the backrest until a click is heard.
Space requirements
●Allow sufficient space for reclining.
●Allow at least 20 inches behind the chair for the
backrest to be fully reclined.
●Allow at least 12 inches in front of the chair for full
extension of the footrest.
Min.
20 inch
Min.
12 inch
●Place the chair on a carpet to protect the floor surface and to prevent noise when operating.
Caution
●Place the chair down carefully when putting it on the floor in order to prevent scratches. It is heavy.
●Place the chair at least 3 feet away from a TV, a radio or other AV equipment. It may cause noise to the equipment.
How to fit the stand for the remote control
Fit the stand firmly using the 2 screws included at the
rear of the right armrest of the main body, as shown in
the figure.
Armrest (right) rear
Stand for
the remote control
Screws for fitting
Power on
1. Connect the power plug to a wall receptacle (socket).
2. The power switch is on the right side of the backrest.
Turn the power on and the display on the remote
control will light up.
* Before connecting the plug to the wall receptacle, make sure that the
power switch is in the OFF position.
* If the massage rollers are in mid-motion when the power is turned off, they
will automatically return to the starting position.
9
How to fold down the backrest
●By raising up the metal fittings for folding, the backrest
can be folded down easily.
Backrest
Metal fittings for folding
Check the fabric
As shown in the figure,
Back pad
raise the back pad and
make sure that the
cover of the main body
is not torn.
Fabric of the
main body
Main body of the
backrest
Before using, please raise the back pad to
ensure that there is no tear in the fabric or
cover. Also, check the chair cover of the
other parts.
If any tear is found, no matter
Warning
how small, please stop using the
chair immediately. Disconnect
the plug and consult the vendor
at once.
Prohibited
Using the chair with a tear in the
fabric or texture may cause electric
shocks or injury.
How to sit on the chair
Make sure that the footrest has been lowered completely. Normally the massage rollers stay at the upper part of the backrest, drawn
back and apart from each other, being separated into left and right positions. This is the home position or storage position. For your
safety, always check to see that the massage rollers do not project outward from the home position. If they do so, turn the power
switch at the seat off immediately so that the rollers return to the home position. Then sit down on the center of the chair slowly.
Warning
Do not sit or step on the footrest when it is raised, which could result in injury, malfunction and accidents.
Required Action
How to use the power recline
●Lowering the backrest:
Press and hold the DOWN part of the reclining button
until the desired angle is obtained. The footrest will
automatically rise as the backrest reclines.
●Raising the backrest:
Press and hold the UP part of the reclining button until
the desired angle is obtained. The footrest will
automatically lower as the backrest rises.
■Reclining buttons
UP button
DOWN button
●When reclining, make sure that
nothing is behind the backrest.
●When reclining or lowering the
Warning
footrest, always be sure that
Required Action
there are no persons, pets or
obstructions around.
How to adjust the angle of the footrest
While sitting in the chair with the footrest up, pull the lever
up toward the footrest. While the lever is up, you can
adjust the footrest so that your calves are resting on it.
Footrest
adjusting lever
UP
Note: The reclining and footrest operating functions are active by adjusting
the UP DOWN buttons even if the remote control is turned off.
●Make sure that your fingers or
any other objects are not
caught between the footrest
Warning
and footrest adjusting lever to
Prohibited
avoid injury and accident.
●Do not let go of the footrest
suddenly after putting it up.
How to adjust the footrest
●Raising the footrest:
Press and hold the UP button until the footrest reaches
the desired angle.
●Lowering the footrest:
Press and hold the DOWN button until the footrest
reaches the desired angle.
■Footrest buttons
UP button
DOWN button
●When lowering the footrest,
make sure that nothing is
Warning
caught between the seat and
Prohibited
footrest.
After Use
Turn off the power switch and be sure to disconnect the
plug from the socket.
●The
auto
timer
function
will
automatically stop the chair. However,
you should be familiar with how to
manually turn off the power switch after
Caution
use to prevent an accidental start of the
chair.
●To avoid accidents, turn off the power
and disconnect the power plug.
10
Hide quick links:
Advertisement
