Technical Specifications; Getting Support - TC-Helicon Ditto Manual

Applying the firmware update
7. Quit all MIDI-related applications (e.g. your
DAW) on your computer and launch the firm-
ware updater you have downloaded in step 1.
8. In the firmware updater app, select "Ditto
Boot" from the drop-down list under the
"STEP 1" heading.
If you are using Windows XP, select "USB Au-
dio Device" from the list.
9. When the "Update" button under the "STEP 2"
heading turns green, click it.
The updated firmware will now be transferred
to Ditto Mic Looper. Wait for the progress bar
to reach 100%. When the update procedure is
complete, the pedal will automatically restart.
Ditto Mic Looper English Manual – 2014-11-17

Technical specifications

Maximum loop length: 5 minutes
►
► Maximum number of overdubs: Unlimited
Dimensions (Width x depth x height):
►
135 mm x 113 mm x 54 mm /
5.31" x 4.44" x 2.13
► Weight: 512 g / 1.13 lbs.
Input connector: XLR
►
Output connector: XLR
►
► Power input: 12 V DC, center negative
USB connector type: Mini-B USB
►
Controls:
►
► Loop level knob
► Loop footswitch
Stop footswitch
►
Due to continuous development, these speci-
fications are subject to change without no-
tice.

Getting support

If you still have questions about the product after
reading this manual and the FAQ page, please
get in touch with TC-Helicon Support:
http://tc-helicon.com/support/
Getting support
12