Lanier IS450DE VRS Supplemental Operating Instructions page 36

VRS Getting Started Guide
Table 4. Invalid Characters for Profile Names
Character
:
;
\
/
|
&
?
!
To change the active profile
From the VRS Interactive Properties dialog, select the Profiles tab.
1
From the Available Profiles list, select the profile you want to use.
2
Select the Load button.
3
Note: If an image is open in the VRS Viewer when you change the active profile, the
image is refreshed with the new settings.
or
From the VRS Interactive Properties dialog, select the Profiles tab.
1
From the Available Profiles list, double-click the name of the profile you want to use.
2
or
From the VRS menu, select the Profiles command.
1
When the Profiles submenu opens, select the name of the profile you want to use.
2
Note: If you change the active profile, it stays in effect for the current VRS session. Each
time you start VRS, Default settings is reset as the active profile.
! To remove a profile from the Available Profiles list:
From the VRS Interactive Properties dialog box, select the Profiles tab.
1
From the Available Profiles list, select the profile(s) you want to remove.
2
Select Remove. The profile name clears from the Available Profiles list.
3
32
Description Character
Colon '
Semicolon "
Backslash >
Slash <
Pipe ^
Ampersand .
Question mark
Description
Single quotation
Double
quotation
Greater than
Less than
Caret
Period
Kofax Image Products