Starting Virtualrescan - Lanier IS450DE VRS Supplemental Operating Instructions

Starting VirtualReScan

Once the installation is complete, activate VRS by selecting the VirtualReScan Source from your
scanning application. Once you select the source, the VRS icon appears on the Windows taskbar
to signal that VRS is active.
Note: During the VRS installation process, the VirtualReScan Source is automatically created
and set as the default scanning source. If you have questions about how to select the source from
your scanning application, consult with your system administrator.
! To start VRS
Power on your scanner.
1
Start your scanning application and select the VirtualReScan Source.
2
The VRS icon appears on your Windows taskbar, similar to Figure 9.
3
Figure 9. VRS Icon
Kofax Image Products
VRS Getting Started Guide
9