Connect Subwoofer; Syncing Bar/Wireless Subwoofer - Polk Audio magnifi soundbar Setup Manual

How to Connect Your Subwoofer
Your subwoofer receives a wireless audio signal from the bar. All you need to
do is plug in the power cord and make sure the main power switch is ON.
Syncing The Bar And Wireless Subwoofer
The MagniFi Soundbar and wireless
subwoofer are preset at the factory to
work together. Should your wireless
subwoofer stop receiving an audio signal,
follow these instructions to re-establish the
connection:*
1. Turn off the subwoofer's AC Mains switch.
2. Press the SYNC button on the back of the bar and hold for
three (3) seconds.
3. The LED on the back of the bar will blink, indicating that the bar and the
subwoofer are ready to be connected.
4. Turn on the subwoofer's AC Mains switch. When the subwoofer LED turns
solid green, the bar and subwoofer are connected and ready to use.
*
Note: If your bar is mounted to the wall, it will need to be removed for this procedure
for more information visit our website at www.polkaudio.com
5