Push Button; The Lamps Of The Unit - Ontech GSM Mini 9009 User Manual

ordinary telephone.
All alarm are acknowledged.
9#
•
Note that all SMS must start with the PIN-code.
•
It is possible to execute multiple commands in the same SMS or telephone
call. The sign # separates the command lines.
•
When the unit is operated from an ordinary telephone the unit replies with
a beep after you have pressed #. If the unit replies with two beeps the unit
has not accepted the command. Try again.
•
Instead of writing the symbol * you can use all letters on button 7 (p, q, r or
s)
•
Instead of writing the symbol # you can use all letters on button 9 (w, x, y
or z)

Push button

On the front of the unit there is a push button.
One push of the button switches the relay.
If an alarm has been activated one push of the button will acknowledge the alarm..

The lamps of the unit

On the front of the unit there is two lamps, one green and one red.
GREEN LAMP
Flashing
Lit
RED LAMP
Lit
Not lit
Flashing
When starting the unit is searching for an GSM network.
When the unit looses contact with the GSM network.
The unit is on/idle
The relay is turned on
The relay is turned off.
An alarm is activated and will flash until the it is
acknowledged.
-17-