Medisana MediTouch 2 Instruction Manual page 30

5 Operating
5. Place the drop onto the blood sample area
on the end of the test strip. Pay attention,
that not any blood gets on the top of the
test strip.
To receive a correct test result, be sure to
apply enough blood into the test strip's blood
sample area - see the confirmation window
as per drawing above.
30
mmol/L
6. When a sufficient amount of blood has been
absorbed by the reaction cell you will hear a
beep and in the display "
7. The device will count down from 5 seconds
(shown in display). After that, "OK" is shown
and then the result appears in the display.
mmol/L
>
" is shown.