Medisana MediTouch 2 Instruction Manual page 21

You need the device, a test strip and the control solution.
mmol/L
>
1. Insert a test strip into the
monitor in the direction
of the arrow.
The -symbol
appears automatically.
The measurement results in the control solution measurement mode will not
be recorded in the memory for blood glucose readings.
mmol/L
> >
>
2. Press the - button, until
the symbol (control solution
measurement mode) appears.
The drop symbol
Press to confirm the
setting.
mmol/L
3. Place the device on a flat and
even surface, e.g. like a table.
4. Remove the cap of the control
flashes.
solution bottle and wipe the tip
of the bottle with a tissue.
5 Operating
21