Initialization - TP-Link JETStream T2700G-28TQ Installation Manual

Caution: Make sure the power supply of RPS150 is cut off when connecting or
disconnecting RPS150 and the switch, otherwise both RPS150 and the switch may work
abnormally or even be damaged.

5.7 Initialization

After the device is powered on, it begins the Power-On Self-Test. A series of tests
run automatically to ensure the device functions properly. During this time, its LED
indicators will respond as follows:
The Power LED indicator will light on all the time.
■
After keeping off for several seconds, the rest of the LED indicators will flash
■
momentarily, and then work as the table in 1.2 Appearance shows after the
initialization.
Figure 5-6 Power on RPS150
Stackable L2+/L3 Managed Switch
Connection
22