Advertisement
Disassembly of your Kodiak is the exact reverse of this procedure, but here are some helpful tips:
To disengage the crossframes from the black nylon plates, first depress the center tab to allow the metal
fixture to move into the free position.
Fold the boatskin up as follows:
1. Tuck the deck fabric into the hull fabric.
2. Fold the keel ends in toward the cockpit so the black urethane castings almost touch at the
center of the skin.
3. Make the next folds the same way you did the previous folds, so the castings are hidden.
4. Finally fold the skin in half and place it in the short bag.
Always make sure the fabric is dry before folding it up! If this is not possible, reassemble the boat at the
next available opportunity and allow it to dry out.
When packing your Folbot back into its bag, generally speaking the crossframes are stacked so that the
smaller frames are placed within the larger frames. Some trial and error may be needed to determine the
best fit and nesting arrangements.
It should be noted that you can get more in the bag than it first appears. Don't give up until you've tried to
zip up—you will be surprised at what can fit in!
Remember: we are here to help if you need us!
Call 800/533-5099, 8:30-4:30 M-F Eastern Time, or visit
www.FOLBOT.com
Page 9 of 10
Advertisement
