Exercise Data Report - biodex 950-400 User Manual

3. Exercise Report Data
Exercise report data can be reviewed from the Exercise Results screen only after selecting
<End> to end the exercise session and then selecting <Results>.
The Exercise Results screen can also be accessed by selecting an individual record from the
Patient Management section in System Utilities.
Figure 3.1. Sample Stored Patient Exercise screen.
Near the top of the screen, you can see the G-code category has been specified as Mobility:
Walking and Moving Around. The G8978 code is derived from making a "Current Status"
selection. Both of these selections are made in the Gait Training Mode Setup Information
screen.
The two columns at the right of the screen pertain to G-code data. The Impair Percentage
numbers refer to what degree the patient could be considered impaired, with 100% meaning
the patient is completely impaired and unable to do the associated task without help.
10 Biodex Medical Systems, Inc. © 2014