Depth Adjustment - Jarvis Marine FWCV SERIES Owner's Manual

DEPTH ADJUSTMENT

Hold the motor shaft with one hand, loosen the depth adjustment screw and set the
motor to the desired depth, then retighten the adjusting screw securely. (C1)
STEERING
To adjust steering counter-force, simply loosen or tighten the counterforce bolt. The ideal
setting is one where the counterforce bolt is just tight enough so that the boat will steer
in the direction you are aiming without need for continual correction. (C2)
HEAD UNIT & SPEED CONTROL
Power on/off switch is positioned underneath the head unit, activate to use the motor
and when de-activated this function will prevent any amp draw from your battery.
The tiller control is telescopic and can be extended to 16cm. Simply push the button at
the end of the grip (D) to set your desired length. The speed control is variable, rotate the
handle clockwise for forward speed and anti-clockwise for reverse. (E)
The tilting head design allows you to fi x the head in your desired position. Loosen the key
lock and move the head in position, then tighten.
POWER & BATTERY GAUGE
Power meter shows speed settings in percentages, full motor speed is 100%. The battery
indicator will only be indicated when the motor speed is at zero.
The Watersnake CV motors are fi tted with a 12 LED Jacklight system when fi shing at night.
Located underneath the head unit, to turn on open the cover. The lights will turn off
automatically when the cover is closed.
(D) (E)
(C)
(1)
(2)