Control Panel - Zanussi ZBB28651SA User Manual

Service
• Any electrical work required to do the serv-
icing of the appliance should be carried out
by a qualified electrician or competent per-
son.
• This product must be serviced by an author-
ized Service Centre, and only genuine spare
parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer, in

Control panel

Temperature indicator LED
1
Quick Freeze indicator
2
Quick Freeze button
3
Temperature regulator
4
ON/OFF button
Switching on
Insert the plug into the wall socket.
Touch the temperature regulator button if all
LED are off.
Switching off
Keep touching the temperature regulator but-
ton for 3 Sec.
All indicators light off.
Temperature regulation
To operate the appliance, proceed as follows:
• touch the temperature regulator button until
the LED corresponding to the required tem-
4
1 2
4 3
either its refrigerant circuit or insulation materi-
als. The appliance shall not be discarded to-
gether with the urban refuse and rubbish. The
insulation foam contains flammable gases: the
appliance shall be disposed according to the
applicable regulations to obtain from your local
authorities. Avoid damaging the cooling unit,
especially at the rear near the heat exchanger.
The materials used on this appliance marked
by the symbol are recyclable.
perature lights up. Selection is progressive,
varying from 2 to 8°C.
At first button touch actual setting LED
keeps blinking.
Any time the button is touch the set temper-
ature is moved to 1 position right. Corre-
sponding LED will blink for a while.
Touch the setting button until the required
temperature is selected. The set will be fixed
coldest setting: +2°C
warmest setting: +8°C
A medium setting is generally the most suita-
ble.
However, the exact setting should be chosen
keeping in mind that the temperature inside
the appliance depends on:
• room temperature
• how often the door is opened
• quantity of food stored
• appliance location.
Quick Freeze function
You can activate the Quick Freeze function by
pressing the Quick Freeze button.
The LED corresponding to the symbol Quick
Freeze indicator lights up.
You can deactivate the Quick Freeze function
by pressing the Quick Freeze button again.
The Quick Freeze indicator will light off.
Important!
This function stops automatically after 52
hours.
www.zanussi.com