Appendix A Software; Trouble Shooting - Rikaline GPS-6033 User Manual

Next Generation GPS
Appendix D
D.1 Trouble Shooting
Problems
No position output but
timer is counting
No position output but
timer is counting
Execute fail
Can not turn on the
COM port
Can not find out
GPS-6033
No Signal
No Signal
Rikaline International Corp.
Tel: ++886 2 2370 4688
Bluetooth GPS

Trouble Shooting

Reasons
Weak or no GPS signal can be
received at the place of GPS-6033
At outdoor space but GPS signal is
blocked by building or car roof.
Bluetooth function unstable
Install GPS-6033 incompletely or The
COM port of the device is being used
Poor connection
No action for few minutes may
cause the Pocket PC entry power
saving mode. It will close the COM
port at the same time.
Weak or no GPS signal when
using GPS-6033 indoor
10F, 64, Kang-Ding Road, Taipei 108, Taiwan
Fax: ++886 2 2370 4686
GPS-6033 Operating Manual
E-Mail: info@rikaline.com.tw
Rikaline
Methods
Find an open space for your
GPS-6033
Use an optional Active Antenna
Re-Start PDA or PC or re-install
software
Install GPS-6033 completely or stop
other device that is being used.
Re-Start PDA or PC and re-install
software.
Close the application and execute it
again to re-open the COM port.
Go outdoors to improve the poor
GPS signal.
Web: www.rikaline.com.tw
19