Snugger 7 Day Timer Operation Manual page 5

Setting System Parameters:
Press and hold both
seconds
Press to toggle through the parameter settings
Press or to adjust current settings
Press to save parameter setting changes and exit
System Parameter Table:
Item Parameter Description
1 F01 Setting the temperature initial value
2 F02 Setting the temperature lower limit value
3 F03 Setting the temperature upper limit value
4 F04 Quantity of time settings per week
5 F05 Whether to use wire control temperature
as the environment temperature
6 F06 Initialize the timer parameters
7 F07 Display Fahrenheit or Celsius
8 F08
@BCL@7C2451F1.doc
and for 10-15
5
Displays Parameter Number and current value
Displays Parameter Number and current value
Displays Parameter Number and changed value
Returns to previous display mode
Default Limits / Notes
Value
20ºC
F02 F03
10ºC
0ºC F03 1
40ºC
F02 60ºC
14
7 30
0~1 The temperature detected by
wire control device can be
used as ambient temperature
of the machine
0- Disabled 1- Enabled
0~1 Initialize the timer parameters,
0-don't Initialize; 1- Initialize
0~1 0-show Celsius; 1-show
Fahrenheit
Oct 28, 2013