Snugger 7 Day Timer Operation Manual page 2

On / Off Control:
Press to start heater
Press to stop heater
Temperature Setting
During heater operation, Press
to set the desired temperature.
Setting Time & Day
Press three times
Press to enter setting mode
Press to alternate between day, hour,
minute settings.
Press or to adjust settings.
@BCL@7C2451F1.doc
displays and heater will begin start-up
Set Desired Temperature displays for 5 sec.
Ambient Temperature displays after 5 sec.
display disappears and heater begins shut-down
Note: If the Multiple Start Program is activated, the
will be displayed.
Desired temperature setting is displayed in ºC or ºF
or
After 10 seconds without activity, current setting is saved
Displays Day, Hour, and Minutes
Active Selection Flashes
After 10 seconds without activity, current setting is saved
2
Flashes
Oct 28, 2013