Advanced - Ralink WLAN USB Adapter for 802.11b/g User Manual

Advanced

This page provides advanced configurations to this adapter. Please refer to the following chart
for definitions of each item.
Items
Wireless mode
Enable TX Burst
Enable TCP Window Size
Fast Roaming at __ dBm
Show Authentication Status
Dialog
TX Rate
Select Your Country Region
Code
Information
Click the drop list to select a wireless mode.
Select to enable connecting to a TX Burst supported device.
Mark the checkbox to enable TCP window size, which help enhance
throughput.
Mark the checkbox to enable fast roaming. Specify the transmit power for
fast roaming.
Mark the checkbox to show "Authentication Status Dialog" while
connecting to an AP with authentication. Authentication Status Dialog
displays the process about 802.1 x authentications.
Manually select the transfer rate. The default setting is auto.
wireless cards do not allow the user to select the TX Rate.)
Eight countries to choose. Channel list:
Classification
0: FCC (Canada)
1: ETSI
2: SPAIN
3: FRANCE
4: MKK
5: MKKI (TELEC)
6: ISRAEL
7: ISRAEL
Range
CH1 ~ CH11
CH1 ~ CH13
CH10 ~ CH11
CH10 ~ CH13
CH14 ~ CH14
CH1 ~ CH14
CH3 ~ CH9
CH5 ~ CH13
(802.11n