Advertisement
<Removing the front panel section>
Removing the control switch board
assembly 1 & 2 and display board
assembly
Prior to performing the following procedure, remove
the metal cover and front panel assembly.
Remove the ten screws O attaching the control
1.
switch board assembly 1 & 2 on the back side of the
front panel assembly (left & right sides).
2.
Remove the four screws P attaching the metal base
on the backside of the sub-panel assembly (center).
Remove the four screws Q on the backside of the
3.
metal base. Then the display board assembly can be
removed.
Removing the system control board
assembly
Prior to performing the following procedure, remove
the metal cover and front panel assembly.
Remove the four screws R attaching the system
1.
control board assembly.
Disconnect the connectors CN611, CN612, CN613,
2.
CN614, CN615 and CN616.
System control board assembly
CN614
(See Fig.10 to 11)
(See Fig. 12)
R
R
CN613
CN616
CN612
Fig.12
Front panel (right)
O
Control switch board (1)
Metal base
Fig.10
Display board
Fig.11
CN611
CN615
AX-M9000
Front panel (left)
Sub-panel
O
P
Control switch board (2)
Q
Metal base
1-5
Advertisement
