Laser Pegs 9000 SPEED DEMON Instructions For Use

Please read manual before you begin! Failure to
9000
follow this manual's instructions may result in
damage to the Triangle Power base, AC adapter
LAND
and/or Laser Pegs®. Not adhering to these
directions will void the manufacturer's warranty.
For Boys And Girls
Packing has to be kept since it contains
Ages 5 And Up
important information.
8 Models+
WARNING:
CHOKING HAZARD
Any creation you can build - Small parts.
Not for children under 3 yrs.
LIGHTED
Do not submerge in water.
CONSTRUCTION SET INCLUDES:
• 10 Laser Pegs®
• 40 Construction Parts
• Triangle Power Base
• Instruction Manual
Construction Compatible
Requires 3 AA Batteries
Compatible with other construction kits
Batteries NOT
EN71, RoHS COMPLIANT
Included
This product complies to
all safety requirements
of ASTM F 963
MODEL INSTRUCTIONS
All additional model instructions can
be downloaded at www.LaserPegs.com
Laser Pegs® Parts List
There is No LED In The 90 Degree Peg
x1
x2
x4
x1
x1
Y
SQUARE SQUARE 90° WHEEL
STACKABLE
PEG
PEG M-M PEG PEG PEG
Each Laser Peg® is color coded on the circuit board inside
Color
each shape. There is No LED In The 90 Degree Peg.
Code
Laser Pegs Stackable
®
Laser Pegs
® link that Triangle Power
Laser Pegs
allows you to connect to
Base Peg Cord
other construction kits.
Construction Parts List
x2
x2
x2
x4
x2
x2
x2
x2
x3
x2
x2
x2
x2
x2
x2
x1
www.LaserPegs.com
This manual is copyright and cannot be reproduced or used online without Laser
Pegs® Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs® Ventures
LLC. 8304 Consumer Ct. Sarasota FL 34240. Contact: Support@LaserPegs.com
Connecting Pegs
To construct with Laser Pegs®, slide two pieces together to form a
connection. Slide each piece on and off smoothly. To build away from the
Triangle Power Base, use the peg cord in one of the top three peg holes to
illuminate your model! The 90° pegs are essential to construction but they
DO NOT ILLUMINATE.
Press Button
Power Button
to turn on/off
Push button to cycle
through 3 different
light settings.
AC Adapter
Connection
Connect Laser Pegs® TRIANGLE POWER BASE
Connect cord to model.
When you remove a peg from another
To build away from the Laser Pegs®
peg or model DO NOT PULL ON CORD!
Triangle power base use the peg
cord in one of the top three holes to
illuminate your model!
When Using Batteries
1. Remove screws.
x1
2. Place three AA batteries in the correct
position - as displayed inside the Triangle
Power Base.
3. Push RED button to turn on!
4. Do not mix old and new batteries.
5. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium)
batteries!
6. Exhausted batteries are to be removed
from the power base.
7. Never connect more than 200 Laser Pegs®
8. Non-rechargeable batteries are not to be
recharged.
Remove the three Philips head
9. Rechargeable batteries are only to be
screws with a 4mm screw driver.
charged under adult supervision.
10. Rechargeable batteries are to be removed
from the toy before being charged.
11. Batteries are to be inserted with the
correct polarity.
12. The supply terminals are not to be short-
circuited.
Using an
AC Adapt
er
®
Remove all batteries
from Laser Pegs® power
base before using the
5 volt AC adapter.
x1
*To avoid short-circuits, keep metal objects and
other un-authorized materials from obstructing
the peg holes.
x1
The AC adapter used with the power base are to be regularly examined for
damage to the cord, plug, enclosure and other parts, and in the event of such
x2
damage, they must not be used until the damage has been repaired.
x2
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically
the reds and yellows) and some won't. When the Laser Pegs® dim the Laser Pegs®
are not broken, they just need stronger batteries or an AC Adapter.
You have 3 simple options...
1. Use a 5 volt AC Adapter –available from www.LaserPegs.com
2. Change the batteries.
3. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more laser pegs you connect!
SPEED DEMON--The ultimate, super-fast and oh, so furious racer.
SPEED DEMON
Model
Difficulty
Level
Peg Holes
A
STEP
1
Requires (3AA) Batteries
STEP
2
When using an AC
Adapter, NEVER
place the adapter
plug into the Tri-
angle power base
top peg holes.
Never connect more than 200
Laser Pegs® when using a 5 volt STEP
(2000mA) AC Adapter. 3
STEP
4
STEP
5
STEP
6
STEP
7
STEP
8