Laser Pegs HADES Instructions

Please read manual before you begin! Failure to
9025
follow this manual's instructions may result in
damage to the Triangle Power Base, AC adapter
EXPERIENCE SERIES
and/or Laser Pegs®. Not adhering to these
MYTHOLOGY
directions will void the manufacturer's warranty.
Packing has to be kept since it contains
For Boys And Girls
important information.
Ages 5 And Up
WARNING:
16 Models+
CHOKING HAZARD
- Small parts.
Not for children under 3 yrs.
Any creation you can build
Do not submerge in water.
LIGHTED
CONSTRUCTION SET INCLUDES:
• 20 Laser Pegs®
• 80 Construction Parts
• Triangle Power Base
• Instruction Manual
Construction Compatible
Requires 3 AA Batteries
Compatible with other construction kits
Batteries NOT
EN71, RoHS COMPLIANT
Included
This product complies to
all safety requirements
of ASTM F 963
MODEL INSTRUCTIONS
All additional model instructions can
be downloaded at www.LaserPegs.com
Laser Pegs® Parts List
x2
x2
There is No LED In The 90 Degree Peg
x1
x1
x4
x2
Y PEG
x4 TRUSS PEG
x1
45° PEG SQUARE
SQUARE
STRAIGHT
PEG
90° PEG M-M PEGG
T-PEG
TRIDENT PEG
Each Laser Peg® is color coded on the circuit board inside
Color
Code each shape. There is No LED In The 90 Degree Peg.
Laser Pegs Stackable
®
Laser Pegs
® link that
Laser Pegs
Triangle Power
allows you to connect to
Peg Cord
Base
other construction kits.
x2 Construction Parts List
x2
x2 x2
x2
x1
x2 x4
x8
x2
x4
x1
x8
x2
x2
x2
x2
x2
x2
x4
x2 x4
x4
www.LaserPegs.com
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs® Ventures
LLC. 8304 Consumer Ct., Sarasota FL 34240. Contact: Support@LaserPegs.com
Connecting Pegs
To construct with Laser Pegs®, slide two pieces together to form a
connection. Slide each piece on and off smoothly. To build away from the
Triangle Power Base, use the peg cord in one of the top three peg holes to
illuminate your model! The 90° pegs are essential to construction but they
DO NOT ILLUMINATE.
Press button
Power Button
to turn on/off
Push button to cycle
through 3 different
light settings.
AC Adapter
Connection
Connect Laser Pegs® TRIANGLE POWER BASE
Connect cord to model.
When you remove a peg from another
To build away from the Laser Pegs®
peg or model DO NOT PULL ON CORD!
Triangle power base use the peg
cord in one of the top three holes to
illuminate your model!
When Using Batteries
1. Remove screws.
2. Place three AA batteries in the correct
x2
position - as displayed inside the Triangle
STACKABLE
Power Base.
3. Push RED button to turn on!
x1
4. Do not mix old and new batteries.
5. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium)
batteries!
6. Exhausted batteries are to be removed
WHEEL PEG
from the power base.
7. Never connect more than 200 Laser Pegs®
8. Non-rechargeable batteries are not to be
recharged.
Remove the three Philips head
9. Rechargeable batteries are only to be
screws with a 4mm screw driver.
charged under adult supervision.
10. Rechargeable batteries are to be removed
from the toy before being charged.
11. Batteries are to be inserted with the
correct polarity.
12. The supply terminals are not to be short-
circuited.
Using an
AC Adapt
er
®
Remove all batteries
from Laser Pegs® power
base before using the
5 volt AC adapter.
x2
*To avoid short-circuits, keep metal objects and
other un-authorized materials from obstructing
the peg holes.
The AC adapter used with the power base are to be regularly examined for
x4
damage to the cord, plug, enclosure and other parts, and in the event of such
damage, they must not be used until the damage has been repaired.
x4
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
x4
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically
the reds and yellows) and some won't. When the Laser Pegs® dim the Laser Pegs®
are not broken, they just need stronger batteries or an AC Adapter.
You have 3 simple options...
1. Use a 5 volt AC Adapter –available from www.LaserPegs.com
2. Change the batteries.
3. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more laser pegs you connect!
HADES - The son of the Titan Cronus and Rhea, brother of Zeus and Poseidon
who governs the underworld.
HADES
Model
Difficulty
Level
Peg Holes
A
STEP
1
STEP
3
Requires (3AA) Batteries
When using an AC
Adapter, NEVER
place the adapter
plug into the Tri-
angle Power Base
top peg holes.
STEP
Never connect more than 200
5
Laser Pegs® when using a 5 volt
(2000mA) AC Adapter.
STEP
6
STEP
7
STEP
2
STEP
STEP
4
STEP
9
STEP
10
B
8