Table of Contents
Advertisement
Brushless Motor Upgrade
Disconnectthebrushedspeedcontrol
fromthethrottlechannelofthe
receiver.
Loosen the two set screws on the motor
coupler.
Install the brushless motor mount to
the brushless motor using the included
3mmX6mm machine screws.
Install the new motor coupler making
suretoaligntheflatswiththesetscrews.
Disconnectbothwaterlinesfromthe
brushed speed control.
Remove the four phillips screws from
themotormount.Disconnectthewater
lines.Remove motor and speed control
from the hull.
Install the brushless motor into the hull
with the included 3mmX7mm screws.
Make sure that the motor wires are
facing up.
Remove the water line and replace with
new long water line.
8
Advertisement
Table of Contents
