Denon Envaya Mini DSB-100 Owner's Manual page 27

Contents Preparation
Changing the device name of
Envaya Mini displayed on the
Bluetooth device
1
When the power is on, press and hold the 1/3 button
and volume adjustment (+) button simultaneously for
approximately 4 seconds.
A notification sound is heard and the status indicator blinks 3 times.
2
Press the volume adjustment button.
The device name changes as shown below each time the volume
adjustment button is pressed.
Button
Volume adjustment
button (+)
Volume adjustment
button (-)
Connections
The device name of Envaya Mini
Envaya Mini2 Envaya Mini3
Envaya Mini Envaya Mini4
Envaya Mini3
Envaya Mini4
Envaya Mini2
Envaya Mini
Operation Troubleshooting
The status indicator blinks as shown below each time the device
name is switched.
The device name of Envaya
Mini
Envaya Mini
Envaya Mini2
Envaya Mini3
Envaya Mini4
z The notification sound beeps at the same time as the status indicator blinks.
NOTE
0 If you change Envaya Mini's Bluetooth device name, you must repair and
reconnect all of your Bluetooth devices using the selected name.
0 When the volume adjustment button is not operated for approximately 5
seconds, the selected device name is entered and Envaya Mini restarts.
You cannot change to a different device name other than those listed above.
27
Appendix
Status Indicator
Blinks once
Blinks twice
Blinks three times
Blinks four times
Index