Denon Envaya Mini DSB-100 Owner's Manual page 25

Contents Preparation
o Speaker is turning off automatically
Symptom
Speaker is turning off
automatically.
The power turns off quickly.
o Speaker is malfunctioning
Symptom
Speaker is malfunctioning.
Connections
To save battery power, the speaker is designed to turn off when no audio is played via Bluetooth for
0
approximately 15 minutes. Power on the speaker by pressing and holding the power button for 2
seconds.
If the input of Envaya Mini is set to AUX and it is not operated for approximately 8 hours, Envaya Mini
0
automatically turns off. Power on the speaker by pressing and holding the power button for 2 seconds. To
turn the AUX Auto Off function on or off, press and hold the battery button for approximately three
seconds while the input of this unit is set to AUX.
If usage time is extremely short even when the battery has been fully charged, the battery may be near
0
the end of its life. In this case, please contact Denon service center.
To reset the speaker, turn on the speaker then, press and release the POWER button, 1/3 button and
0
BATTERY button simultaneously. Envaya Mini is reset.
The speaker needs to be reset to the factory default settings. Turn on the speaker. Press and hold the
0
BATTERY and 1/3 buttons together for approximately 4 seconds. The status indicator will blink 4 times
to indicate a reset (Note: All pairing information from Bluetooth devices will be erased).
Operation Troubleshooting
Cause / Solution
Cause / Solution
25
Appendix
Index
Page
9
9
－
Page
28
－