Advertisement
UK Zeitschaluhr Innen.book Seite 7 Dienstag, 20. Juli 2010 2:25 14
Note
- If you want the connected device to remain switched on, push the lateral switch until
you can see the on symbol
- Push back the switch to the former position (the clock symbol
again initiating switching operation with regard to time.
Usage notes
As soon as the timer switch is disconnected from the mains outlet or in case of power outage
z
the dial ("the clock") is deactivated.
With the current again flowing, e.g. following a power outage, the dial again starts to turn round.
z
The time is not automatically adjusted in this case, though.
Thus, check in case of longer use whether the set time corresponds to the actual time.
z
The time scale given for this mechanical timer switch is the quarter of an hour. It is not possible
z
to set the time as per minute. If you need to have a device switched on or off at exactly 10:08,
for example, this timer switch will not be suited to your needs. Use a digital timer switch
instead.
CLEANING
ATTENTION
Unplug the timer switch from the mains before cleaning the switch or its connected
device.
X
When required, wipe the timer switch clean with a soft, dry cloth.
TECHNICAL DATA
Name:
Power supply:
Protection class:
Switching load:
Ambient temperature:
Circuit breaker:
Ohmic load:
HELPLINE No. U K / N.IRELAND 0800 328 6020 REP. IRELAND 00800 4467 5888
WEB SUPPORT info@dariolondon.com
.
Mechanical timer
220 - 240 V ~ 50 Hz
1
13 A (ohmic load) / 2 A (inductive load)
0 °C to +40 °C
Micro interrupt
max. 3,120 W
becoming visible) for
GT-ZSm-01
7
Hide quick links:
Advertisement
