High-Pass And Low-Pass Filter Bypass Function - HELIX PP50DSP Operating Instructions Manual

Important information about the PP50 DSP:
If you are using the PP50 DSP with the PP 7E or PP 7S subwoofers,
please adjust the subwoofer channel high-pass filter settings as follows:
• Crossover frequency: 49 Hz
• Characteristics: Self-Define
• Q-Factor:
High- and low-pass filter bypass function
Use the bypass button to completely bridge the effect of a high- or low-pass filter with a single
push of a button to obtain a simple acoustic comparison "with and without filter".
Important information:
In fully active systems, do not simply bypass the tweeter high-pass filter. Without any frequency
crossover, irreparable damage may be caused even at low volumes! Bridging a low-pass filter, on
the other hand, is generally uncritical and will not result in any damage to the loudspeaker.
22
1.5