Advertisement
Using Menu Functions
Various menus allow you to make settings for the picture, sound and other
functions.
Display the menu
Displays the functions that can be set (varies according to the input
signal)
Main Menu
Select the menu
Picture
access
Sound
Setup
(example)
select
Picture Menu
1/2
Select the item and change the
Viewing Mode
Normal
setting
Backlight
50
Contrast
90
store or access
Brightness
0
(required by some functions)
Colour
50
change setting
Sharpness
50
Tint
0
select item
Colour Balance
Normal
Channel Colour Set
0
• Choose from among alternatives
(example)
Number and positions of alternatives
•
To return to TV
Colour Balance
Normal
at any time
Changed
• Adjust using the slide bar
•
To return to the
Sharpness
previous screen
Moved
• Go to the next screen
up
•
To change menu
Tuning Menu
Access
pages
down
Displays the next screen
Sound Menu
When you are not sure how to
Mode
Music
operate, refer to the on-screen
Bass
operation guides for help.
Treble
Balance
Surround
Off
Volume Correction
Speaker Distance to Wall
Over 30cm
Stereo
MPX
Select
EXIT
On-screen operation guide
Change
RETURN
TH-L32C20KMRTX23,26,28K_EN_Folding.indd Sec1:8
VIERA Link Settings
VIERA Link
Sets to use VIERA Link functions (Off / On)
Power on Link
When the connected equipment starts playback or direct
navigator / function menu for the equipment is activated, the TV is automatically
turned on. (Only when the TV is in Standby mode.) (Off / On)
Power off Link
When the TV is set to Standby mode, the connected equipment
is also automatically set to Standby. Th is function will work even if the TV enters
standby mode automatically by Off Timer function or auto power standby function.
(Off / On)
Standby Power Save
Th is function is available when "VIERA Link" and "Power
†
¹
off Link" are set to "On". It controls the power consumption in Standby mode of the
connected equipment to reduce the power consumption (Off / On)
Intelligent Auto Standby
Th is function is available when "VIERA Link" is set to
†
¹
"On" . It makes non-used connected equipment go into Standby mode to reduce the
power consumption (Off / On (With reminder) / On (No reminder))
†
¹ Only eff ective if the connected equipment supports this function.
System Menu
Shipping Condition
Resets all settings to the original condition. Aft er
performing this function, "Initial Setup" (p. 6) will automatically start when Mains
power On / Off switch is next turned On.
Soft ware Licence
Displays the soft ware licence information
System Information
Displays the system information of this TV
Other Settings
AV Colour System
Selects optimum colour system based on video signals in AV
mode (Auto / PAL / SECAM / M.NTSC / NTSC)
Colour Matrix
Available only with 480p or 576p input on video signals in a
natural colour from digital equipment connected to AV1 component or HDMI
terminal. Select SD or HD to adjust suitable colour parameters for SD (standard
defi nition) or HD (high defi nition)
–
SD : Input signal is a normal TV system
–
HD : Input signal is a high defi nition system
Auto Standby
Sets the TV to automatically goes to Standby mode when no
operation is performed within the selected period (Off / 2 hours / 4 hours)
Automatic input switching with the connected equipment aff ects this function and
time-count will be reset. A notifi cation message will appear 3 minutes before going
into Standby mode.
Power Save
Reduces picture brightness to reduce power consumption (Off / On)
16:9 Overscan
Selects the screen area for displaying the image (Off / On)
–
On : Enlarges the image to hide the edge of the image
–
Off : Displays the image in the original size
–
Set to "On" if noise is generated on the edges of the screen.
–
Th is function is available when aspect is set to "16:9".
–
Th is function can be memorized separately for SD (Standard Defi nition) and HD
(High Defi nition) signals.
•
Only available items can be selected.
•
A diff erent menu will be displayed in the mode of SD Card (p. 14).
TH-L32C20KMRTX23,26,28K_EN_Folding.indd Sec1:10
Stereo / Bilingual Sound Selection
When you receive the stereo / bilingual sound system, sound output modes can
be selected by pressing the Stereo / Bilingual Sound Selection button.
Audio Signal
STEREO
MAIN
SUB
Mode Indicator
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Regular +
NICAM DUAL
Regular broadcast
NICAM
Type of broadcast
NICAM MONO
(Standard Audio)
STEREO
(MAIN )
(MAIN / SUB )
No
Mode Indicator
Indicator
A2 (German) .......Used in Australia, Malaysia etc.
Regular broadcast
BILINGUAL or DUAL MONO:
Type of broadcast
(Standard Audio)
MAIN / SUB
No
Mode Indicator
Indicator
•
If the stereo signal is poor or the receiving conditions are not optimum or if
STEREO:MONO automatic switching occurs, it is recommended you switch from
STEREO to MONO.
•
Even when the contents of the receiving signal undergo changes, selection mode is kept
intact.
•
When the receiving conditions deteriorate, listening will be easier if the mode is set to the
MONO position, using the Stereo / Bilingual Sound Selection button.
•
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in
some countries.
VIERA Link "
Control™"
Enjoy additional HDMI interoperability with Panasonic products which have "HDAVI
Control" function. Th is TV supports "HDAVI Control 5" function. Connections to the
equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifi er, etc.) with
HDMI cable allow you to interface them automatically. Th ese features are limited to
models incorporating "HDAVI Control" and "VIERA Link".
•
Some functions are not available depending on the equipment's version of HDAVI
Control. Please confi rm the connected equipment's version of HDAVI Control.
•
VIERA Link "HDAVI Control", based on the control functions provided by HDMI
which is an industry standard known as HDMI CEC (Consumer Electronics Control), is
a unique function that we have developed and added. As such, its operation with other
manufacturers' equipment that supports HDMI CEC cannot be guaranteed.
•
Please refer to individual manuals for the equipment. About applicable Panasonic
equipment, consult your local Panasonic dealer.
TH-L32C20KMRTX23,26,28K_EN_Folding.indd Sec1:12
Viewing from SD Card (VIERA IMAGE VIEWER)
Photo View: View still pictures recorded on a digital
To view a single photo (Single view)
camera.
•
During the operation, no signals are output from any of
the AV terminals.
•
"Date" shows the date on which the recording was made
by the digital camera. It is shown with asterisks when
Single view
the fi le has no record of the date.
Rotate
EXIT
Select
Insert the SD card
Side of the TV
List
Slideshow
•
To display / hide the operation guide
Label surface
•
To return to thumbnail (List)
Push the center of the
card until a click is heard
To start Slideshow within the thumbnail
(To remove, push again)
•
To pause
•
Enter SD mode (Photo View)
To return to Single view
All photos in SD Card are displayed by
Slideshow settings
thumbnail.
VIERA Main Menu
Select the folder you want to view
Select an item and change the setting
Viewing Setup
Photo View Mode
Folder view
Transition Effect
select
Colour Effect
1/23
Folder name
Interval
100_PANA
100_PANA
101_PANA
102_PANA
200_PANA
Number of pictures
Repeat
38 pictures
3 pictures
14 pictures
20 pictures
38 pictures
view
Transition Eff ect
201_PANA
ROOM
Fruit
Nature
Select
EXIT
7 pictures
1 picture
18 pictures
14 pictures
slideshow (Off / Wipe / Wipe / Wipe
Select
RETURN
View
Comb
/ Comb
(Folder view)
All pictures
•
Random / Multi / Collage)
Th e fi les which are not in a folder will be collected
•
When you select "Random", all eff ects are performed
to the folder named "/".
•
randomly except "Multi" and "Collage".
To display all the photos
Colour Eff ect
Select a photo
slideshow (Off / Sepia / Gray scale)
Selected photo
Error display (unloadable image, etc.)
Interval
(Short / Normal / Long)
Photo View Mode
Repeat
Folder view
select
100_PANA
1/38
p1010001
p1010002
p1010003
p1010004
File name
p1010001
To sort into folders
Date
2008/10/23
Pixel
•
1600 x 1200
p1010005
p1010006
p1010007
p1010008
To sort by month
•
Select
To sort by date
EXIT
Select
p1010009
p1010010
p1010011
p1010012
RETURN
•
View
To return to unsorted
(Th umbnail)
S
d i l
e
s
h
o
w
S
o
t r
b
y
M
o
n
h t
S
o
t r
b
y
D
a
e t
thumbnail
Information of selected photo
TH-L32C20KMRTX23,26,28K_EN_Folding.indd Sec1:14
A2 Landscape - en.indd 2
A2 Landscape - en.indd 2
Menu List & Functions
Picture Menu - Settings for picture
Viewing Mode
Basic picture mode (Dynamic / Normal / Cinema / Game)
•
In each Viewing Mode; Backlight, Contrast, Brightness, Colour, Sharpness, Tint, Colour
Balance and 3D-COMB can be adjusted and stored to your preference
•
Set for each input signal
Dynamic : Provides enhanced picture contrast and sharpness when viewing in a
bright room
Normal : Recommended for viewing under normal lighting conditions
Cinema : For watching movies in a darkened room with improved performance of
contrast, black and colour reproduction
Game : Fast response signal specifi cally to provide suitable images for playing games
–
Not valid on TV mode.
–
A continuous record of time spent in Game mode can be displayed in the top
right of the screen
"Playing Time Display" (p. 9).
•
When SD Photo input is selected, the picture mode options will be
(Dynamic / Normal / Photo)
Backlight Contrast Brightness Colour Sharpness
the levels of these options according to your personal preference
Tint
With an NTSC signal source connected to the TV, the picture hue can be
adjusted to suit your taste
•
For NTSC or Component / HDMI input signal reception only.
Colour Balance
Allows you to set the overall colour tone of the picture
(Cool / Normal / Warm)
Channel Colour Set
Colour density varying between broadcast channels can be
adjusted to three levels for each reception channel
•
Select the channel you want to adjust and set this function.
50
P-NR
A picture noise reduction function which automatically reduces unwanted
picture and fl icker noise in the contoured parts of a picture (Off / Min / Mid / Max)
•
Not valid on PC signal.
3D-COMB
Makes still or slow moving pictures look more vivid (Off / On)
•
Occasionally, while viewing still or slow moving pictures, colour patterning may be
seen. Set to "On" to display sharper and more accurate colours.
1/2
•
For PAL or NTSC signal reception only.
•
Not valid on Component, PC, HDMI and SD card.
0
0
Advanced PC Settings
0
R-Gain, G-Gain, B-Gain
Adjusts each gain
0
Gamma
Changes the gamma curve (2.0 / 2.2 / 2.5)
Reset to Defaults
Press the OK button to reset the present Advanced PC Settings
to the default.
Page up
Reset to Defaults
Press the OK button to reset the present Picture Menu settings
Page down
to the default.
8
Input Labels
For your convenience, you can label each input terminal or skip any unused
terminal.
VIERA Main Menu
Setup
Display Settings
Select an input terminal and set
Input Labels
AV1
AV1
AV2
AV2
PC
PC
HDMI
HDMI
Th e labels you set will be displayed in "Input Selection" menu (p. 14) or
banner.
•
If "Skip" is selected, you cannot select the mode.
Control channel audience (Child Lock)
You can lock specifi c channels / AV input terminals and control who watches them.
When the locked channel / input is selected, a message appears; by entering the PIN
number, you can watch it.
VIERA Main Menu
Setup
Child Lock
Set
Enter the PIN number (4 digits)
(enter twice if fi rst setting)
•
To cancel
Child Lock-PIN Entry
Select the locked channel /
Please enter new PIN
input
PIN
*
* * *
Select "Child Lock List"
•
To lock all
Child Lock
•
To cancel all locks
Change PIN
•
To change the PIN number
Child Lock List
Access
Select "Change PIN" in
Select the channel / input to be locked
"Child Lock" and enter a
new PIN number twice
Child Lock List - TV and AV
N
a
m
e
L
o
k c
1
2
Lock
NOTE
3
Lock
4
Lock
5
Lock
Performing "Shipping
6
Lock
7
Lock
Condition" erases the PIN
8
Lock
number and all settings.
Appears when the channel / input is locked
10
Connected equipment
DVD
HD Video
with VIERA Link
Player /
DIGA
Camera /
function
Blu-ray
Recorder
1
LUMIX
Disc
1
Camera
Features
Player
1
MONO
Easy playback
Power on link
Power off link
MONO
Reduce unnecessary power
4
4
–
consumption in standby
Auto standby for unnecessary
–
3
3
equipment
Control the menu of the
3
3
3
connected equipment by
STEREO
VIERA remote control
–
–
–
Speaker control
: HDMI Connection only
: HDMI and Audio out connections
: available with the equipment which has "HDAVI Control 2 or later" function
: available with the equipment which has "HDAVI Control 4 or later" function
: while playingback a disc
: except for watching a disc
Connection
•
For DIGA Recorder / DVD Player / Blu-ray Disc Player / HD Video Camera / LUMIX
Camera with VIERA Link function, connect to HDMI terminal via an HDMI cable.
•
For Player theatre / Blu-ray Disc theatre / Amplifi er, connect to HDMI terminal via an
HDMI cable and/or RCA cable for audio output from the TV.
•
Use fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilized.
Recommended Panasonic's HDMI cable part number:
• RP-CDHS15 (1.5 m) • RP-CDHS30 (3.0 m) • RP-CDHS50 (5.0 m)
Preparations
•
Connect the equipment supporting VIERA Link.
•
Set up the connected equipment. Read the manual of the equipment.
•
Set VIERA Link On in Setup Menu
"VIERA Link" (p. 10)
•
Set up the TV
Aft er connection, turn the equipment on and then switch the TV on. Set
the input mode to HDMI (p. 14), and make sure that an image is displayed correctly.
Th is setup should be done each time when the following conditions occur:
• for the fi rst time • when adding or reconnecting equipment • when changing setup
12
SD card on screen messages
Message
Cannot read fi le
Th e fi le is broken or unreadable.
Th e TV does not support the format.
To previous photo
No SD card inserted Confi rm SD Card is inserted correctly.
Rotate 90° (anti-
No valid fi le to play
Th e card has no data.
clockwise)
To next photo
Over 9999 pictures
Maximum valid number of photos
Rotate 90° (clockwise)
found (max. is 9999)
is 9,999.
Start Slideshow
Watching External Inputs
Display the input selection menu
cursor up button (press again to resume)
Select the input mode of the connected
equipment to watch
Example (AV2)
Viewing Setup
Input Selection
AV1
AV2
PC
Off
change
HDMI
Off
Short
select
TV
On
You can also select the input using the AV button
Selects the transition eff ect for
on the side panel of the TV (p. 5)
/ Wipe
/
repeatedly until the desired input is selected.
/ Dissolve / Checker Wipe /
You can label or skip each input mode
Labels" (p. 10)
Skipped inputs will not be displayed when the AV
button is pressed.
Selects the colour eff ect for
NOTE
•
If the external equipment has an aspect adjustment
Selects slideshow interval
function, set it to "16:9".
•
It is also possible to switch to PC input directly from
Slideshow repeat (Off / On)
TV mode by pressing the PC button.
•
You can also listen to the PC sound by connecting an
audio cable.
select sorted
•
You can set up some functions; Advanced PC Settings
folder
(p. 8) in Picture Menu and PC Setup (p. 9) in Setup
view
Menu.
thumbnail
•
For HDMI-compatible PC, it is possible to connect to
HDMI terminal by using HDMI cable.
14
Sound Menu - Settings for sound
Mode
Basic sound mode (Music / Speech / User)
•
Th e selected mode aff ects all input signals.
Music : Improves sound quality for watching music video, etc.
Speech : Improves sound quality for watching news, drama, etc.
•
In Music and Speech mode, you can adjust the "Bass" and "Treble" settings, and those
settings will be stored for each mode.
User : In this mode, "Equalizer" will appear in the Sound Menu instead of "Bass"
and "Treble". Adjust the "Equalizer" to your preference
Bass
Adjusts the bass level
Treble
Adjusts the treble level
Equalizer
Adjusts the frequency level to suit your favourite sound quality
•
With / button, select a frequency band, then with / , adjust its level.
•
If you want to enhance the bass sound, raise the level of the lower frequency. If you want
to enhance the treble sound, raise the level of the higher frequency.
•
To reset the level of each frequency to the default settings, select "Reset to Defaults" with
Increases or decreases
the cursor button, then press the OK button.
Balance
Adjusts the volume level of right and left speakers
Surround
Surround sound settings (Off / V-Audio)
V-Audio: Provides a dynamic enhancer to simulate improved spatial eff ects
•
Switching is also possible by the Surround button on the remote control (p. 5).
Volume Correction
Adjusts the volume of individual channel or input mode
Speaker Distance to Wall
Adjusts the low frequency sound
(Over 30cm / Up to 30cm)
•
If the back space between the TV and wall is over 30 cm, select "Over 30cm".
•
If the back space between the TV and wall is within 30 cm, select "Up to 30cm".
MPX
Selects multiplex sound mode (if available) (p. 12)
•
Normally : Stereo
•
Stereo signal cannot be received : Mono
•
M1 / M2 : Available while mono signal is transmitted
HDMI Input
Select to fi t the input signal (Digital / Analogue)
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
•
HDMI input mode only.
Reset to Defaults
Press the OK button to reset the present settings of Mode,
Balance and Surround in Sound Menu to the default.
5/25/2010 3:27:52 PM
TH-L32C20KMRTX23,26,28K_EN_Folding.indd Sec1:9
Tuning and Editing Channels
You can skip unwanted channels and retune the TV channels when necessary.
VIERA Main Menu
Setup
Input Labels
Select the function you want to perform
Tuning Menu
Channel List Edit
Access
Auto Tuning
Access
Manual Tuning
Access
Channel List Edit
You can hide (skip) unwanted channels. Th e hidden channels cannot be displayed
except in this function.
Select a channel, then select to reveal or hide
Channel List Editor
8
9
10
11
12
13
14
•
To reveal all channels
•
To retune selected channel (Manual Tuning)
Auto Tuning
You can set all TV channels automatically.
Start Auto Tuning
Auto Tuning
All tuning data will be erased
EXIT
Start Auto Tuning
RETURN
•
All the previous tuning settings are erased.
•
When the operation is completed, the channel at channel position "1" will be
displayed.
•
Search begins in the order from the lower channels to the higher channels. Channels
received during this process are added to the list (see above).
•
If tuning has not been done completely
5/25/2010 3:27:53 PM
TH-L32C20KMRTX23,26,28K_EN_Folding.indd Sec1:11
Using VIERA Link Menu
Blu-ray
Player
Disc
Amplifi er
2
Display "VIERA Link Menu"
theatre
2
theatre
2
VIERA Link Menu
VIERA Link Control
Recorder
Speaker Selection
Home Cinema
5
5
–
Select the function you want to perform
–
If you cannot operate, check the settings and the equipment
"Summary of features", "Connection", "Preparations" (p. 12)
–
4
–
VIERA Link Control
You can control some functions of the connected equipment with this TV remote
3
control by pointing at the TV's signal receiver.
Select "VIERA Link Control", then select the equipment you want to access
3
3
–
VIERA Link Menu
Recorder / Player /
VIERA Link Control
Recorder
/ LUMIX / Digital Camera /
Speaker Selection
Home Cinema
select "VIERA Link Control"
select the equipment
access
You can also access VIERA Link Control
by using VIERA TOOLS (see below).
Th e menu of the accessed equipment is displayed. Th e displayed item may
vary depending on the connected equipment. (Input mode will be changed
automatically.)
Operate the connected equipment
Follow the operation guide.
To display the operation guide
Move the cursor / select the menu
Move the cursor / access / adjust
When the key words are displayed on colour bar
Some operations may not be available depending on the equipment. If so, use its own
remote control.
If you access non-VIERA Link equipment
When the equipment with "HDAVI Control" function is connected
VIERA Link Menu
VIERA Link Control
Recorder
Type of the connected equipment is displayed.
Speaker Selection
Home Cinema
You can access the menu of the equipment but you cannot operate it.
Use its own remote control to operate the equipment.
5/25/2010 3:27:55 PM
TH-L32C20KMRTX23,26,28K_EN_Folding.indd Sec1:13
Input signals that can be displayed
Meaning / Action
Input
Signal name
525 (480) / 60i
525 (480) / 60p
625 (576) / 50i
COMPONENT
625 (576) / 50p
750 (720) / 60p
(Y, P
/C
, P
/C
),
B
B
R
R
750 (720) / 50p
HDMI
1,125 (1,080) / 60i
Mark: Applicable input signal
1,125 (1,080) / 50i
1,125 (1,080) / 60p
1,125 (1,080) / 50p
1,125 (1,080) / 24p
Input
640 × 400 @70 Hz
640 × 480 @60 Hz
640 × 480 @75 Hz
800 × 600 @60 Hz
800 × 600 @75 Hz
800 × 600 @85 Hz
852 × 480 @60 Hz
PC (from D-sub 15P)
watch
1,024 × 768 @60 Hz
Applicable input signal for PC
1,024 × 768 @70 Hz
is basically compatible to VESA
1,024 × 768 @75 Hz
select
standard timing.
1,024 × 768 @85 Hz
1,280 × 1,024 @60 Hz
1,280 × 768 @60 Hz
1,366 × 768 @60 Hz
Press the button
Macintosh13" (640 × 480)
Macintosh16" (832 × 624)
"Input
Macintosh21" (1,152 × 870)
PC (from HDMI terminal)
640 × 480 @60 Hz
Applicable input signal for PC
750 (720) / 60p
is basically compatible to HDMI
standard timing
1,125 (1,080) / 60p
NOTE
•
Signals other than above may not be
displayed properly.
•
Th e above signals are reformatted for
optimal viewing on your display.
•
PC signal is magnifi ed or compressed
for display, so that it may not be
possible to show fi ne detail with
suffi cient clarity.
5/25/2010 3:27:56 PM
TH-L32C20KMRTX23,26,28K_EN_Folding.indd Sec1:15
Setup Menu - Settings for TV
PC Setup
Input Resolution
Switches to wide view
–
VGA (640 × 400 pixels, 640 × 480 pixels), WVGA (852 × 400 pixels, 852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
–
Options change depending on signals
Clock
Set to the minimum level if noise occurs
H-pos
Adjusts screen horizontal position with / button
V-pos
Adjusts screen vertical position with / button
"Equalizer" (below)
Clock Phase
Eliminates fl icker and distortion. Adjust aft er Clock adjustment and
set to the minimum level if noise occurs.
Sync
PC sync signal type (H & V / On Green)
–
H & V : by the horizontal and vertical signals from your PC
–
On Green : by green signal from your PC
Reset to Defaults
Press the OK button to reset the present PC Setup settings to
the default.
Off Timer
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Child Lock
Locks a channel / AV input to prevent access to it (p. 10)
Tuning Menu
Channel List Edit
Skips the unwanted channels or edits channels (p. 11)
Auto Tuning
Sets TV channels automatically (p. 11)
Manual Tuning
Sets TV channels manually (p. 11)
OSD Language
Changes language for on-screen displays
(English /
/
/
Display Settings
Teletext
Teletext display mode (FASTEXT / List) (p. 7)
Teletext Character Set
Persian)
Input Labels
Labels or skips each input terminal (p. 10)
Playing Time Display
Game mode every 30 mins (Off / On)
–
Th is function is available when "Game" is selected in "Viewing Mode".
9
Manual Tuning
Tuning Menu
Manual Tuning
8
Fine Tuning
Manual Tuning
1
Sound System
4.5MHz
Colour System
NTSC
Enter channel
Select
Store
EXIT
Search
RETURN
Fine Tuning
Use to make small adjustments to the tuning of an individual channel (aff ected by
weather conditions, etc.)
Manual Tuning
Set channel manually aft er Auto Tuning.
reveal / hide
•
Before performing this function, you need to set the "Sound System" and "Colour
System".
select
Set Colour System "Auto" normally.
•
:reveal
If a VCR is connected only with the RF cable, select channel position "0".
:hide (skip)
Select channel position
Auto tuning using the buttons on the TV
Auto Tuning
1
CH2
Scan
1
120
EXIT
Settings are made automatically
"Manual Tuning" (see right)
11
Speaker Selection
You can control the theatre speaker with this TV remote control by pointing at the
TV's signal receiver.
Select "Speaker Selection", then set to "Home Cinema" or "TV"
VIERA Link Menu
VIERA Link Control
Speaker Selection
Home Cinema
Player theatre, Blu-ray Disc theatre or Amplifi er in Standby mode will be
automatically turned on and the TV sound will be output from the speakers
connected to the equipment.
•
Volume up / down
•
Mute
†2
Home Cinema / Video Camera
†3
Other
•
Th e sound of TV speakers is mute.
†
² "Home Cinema" means Player theatre,
•
When the equipment is turned off , TV speakers will be active.
Blu-ray Disc theatre or Recorder theatre.
TV
†3
"Other" means Tuner set top box.
TV speakers are active.
If you wish to enjoy multi-channel sound (e.g. Dolby Digital 5.1ch) via an
Amplifi er, connect with HDMI and RCA cable, and then select "Home Cinema".
To enjoy the sound from the DIGA Recorder in multi-channel sound, connect
an HDMI cable from the DIGA Recorder to the Amplifi er.
•
Th ese functions may not work properly depending on the connected equipment.
•
Image or sound may not be available for the fi rst few seconds when input mode is
switched.
•
Easy playback may be available by using the remote control for Player theatre, Blu-ray
Disc theatre or Amplifi er. Read the manual of the equipment.
Store / set / access
•
"HDAVI Control 5" is the newest standard (current as of December, 2009) for HDAVI
Control compatible equipment. Th is standard is compatible with conventional HDAVI
Return to the previous menu
equipment.
•
To confi rm this TV's version of HDAVI Control
Exit the menu
VIERA TOOLS
Directly accesses to some special features.
Display icon of the features
Select a feature, then follow the operation of each feature
VIERA Link Control
13
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the
COMPONENT
HDMI
problem. If problem still persists, please contact your local Panasonic dealer.
White spots or shadow images (noise)
• Check the position, direction, and connection
of the aerial.
Neither image nor sound is produced
• Is the TV in "AV mode"?
• Is the mains lead plugged into the socket outlet?
• Is the TV turned On?
• Check "Picture Menu" and volume.
• Check all required cables and connections are
fi rmly in place.
Horizontal
Vertical
An error message appears
Signal name
frequency
frequency
• Follow the message's instructions.
(kHz)
(Hz)
• If the problem persists, contact your local
31.47
70.07
Panasonic dealer.
31.47
59.94
Th ere may be red spots, blue spots, green
37.50
75.00
spots and black spots on the screen
37.88
60.32
• Th is is a characteristic of liquid crystal panels
46.88
75.00
53.67
85.06
and is not a problem. Th e liquid crystal panel is
31.44
59.89
built with very high precision technology giving
48.36
60.00
you fi ne picture details. Occasionally, a few non-
56.48
70.07
active pixels may appear on the screen as a fi xed
60.02
75.03
point of red, green, blue or black.
68.68
85.00
Please note this does not aff ect the performance
63.98
60.02
of your LCD and it is not a quality problem.
47.70
60.00
48.39
60.04
"VIERA Link" function does not work and
35.00
66.67
an error message appears
49.73
74.55
• Confi rm the connection.
68.68
75.06
• Turn the connected equipment on and then
31.47
60.00
switch the TV on.
Th e LCD panel moves slightly when it is
45.00
60.00
pushed with a fi nger
Clattered sound might be heard
67.50
60.00
• Th ere are some looseness around the panel to
prevent damage to the panel.
Th e panel might move slightly when it is pushed
HDMI terminal
with a fi nger, and clattered sound might be
Hot Plug Detect
19
18 +5V Power
heard. Th is is not a malfunction.
DDC/CEC Ground 17
16 SDA
TV goes into "Standby mode"
SCL
15
14 Reserved (in cable but
CEC
13
N.C. on device)
• Auto power standby function is activated.
TMDS Clock Shield 11
12 TMDS Clock−
• Th e TV enters Standby mode about 30 minutes
TMDS Data0−
9
10 TMDS Clock+
TMDS Data0+
7
8 TMDS Data0 Shield
aft er broadcasting ends.
TMDS Data1 Shield 5
6 TMDS Data1−
No sound is produced
TMDS Data2−
3
4 TMDS Data1+
• Is "Sound Mute" active?
TMDS Data2+
1
2 TMDS Data2 Shield
• Is the volume set to the minimum?
15
/
/
/ Indonesia / Français)
Selects teletext language (English / CIS / E.Europe /
Set to "On" to display a continuous record of time spent in
Continued
p. 10
5/25/2010 3:27:53 PM
CH37
120
CH Up
CH Down
Select channel
Store
Search
Press repeatedly until "Auto Tuning"
appears
Access "Auto Tuning"
Start "Auto Tuning"
•
To return to TV
5/25/2010 3:27:54 PM
Recorder
set
Home Cinema
select "Speaker Selection"
Volume slide bar will be displayed when adjusting the volume of
the equipment.
"System Information" (p. 10)
VIERA Link Control /
Speaker Selection /
select
Slideshow / Photos
access
5/25/2010 3:27:55 PM
Th e remote control does not work or is
intermittent
• Are the batteries installed correctly?
• Has the TV been switched On?
• Point the remote control directly at the front of
the TV (within a 30 degree angle of the front of
the TV).
• Situate the TV away from sunshine or other
sources of bright light not to shine on the TV's
remote control signal receiver.
Sound is unusual
• Set the sound setting of the connected
equipment to "2ch L.PCM".
• Check the "HDMI Input" setting in the Sound
Menu.
• If digital sound connection has a problem, select
analogue sound connection.
Sound level is low or sound is distorted
• Sound signal reception may be deteriorated.
• Set "MPX" in the Sound Menu to "Mono".
Pictures from external equipment are
unusual when the equipment is connected
via HDMI
• Is the HDMI cable connected properly?
• Turn Off the TV and equipment, then turn them
On again.
• Check an input signal from the equipment.
• Use an equipment compliant with
EIA/CEA-861/861B.
No image can be displayed
• Is "Colour" or "Contrast" in the Picture Menu set
to the minimum?
Blurry or distorted image
(no sound or low volume)
• Reset channel.
Chaotic image, noisy
• Change the setting of "P-NR" in the Picture
Menu (to remove noise).
• Check nearby electrical products (car,
motorcycle, fl uorescent lamp).
Unusual image is displayed
• Turn off the TV with Mains power On / Off
switch, then turn it on again.
5/25/2010 3:27:57 PM
5/25/2010 3:29:18 PM
5/25/2010 3:29:18 PM
Advertisement
