Diagnosis - D-Link DSL-2730U User Manual

DSL-2730U User Manual
In this page, you can configure the IP address for access control list (ACL). If ACL
is enabled, only devices with the specified IP addresses can access the device.
Tick Enable Access Control Mode to enable ACL.
Note:
If you enable the ACL, ensure that IP address of the host is in the ACL
list.
To add an IP address to the IP list, cick Add. The page shown in the following
figure appears.
Click Apply to apply the settings.
3.4.4

Diagnosis

Choose MANAGEMENT> Diagnosis. The Diagnosis page shown in the
following figure appears. The page contains DSL Test and Traceroute.
67