Leds And Interfaces - D-Link DSL-2730U User Manual

DSL-2730U User Manual
are designed for heat dissipation to ensure that the device works normally.
Do not cover these heat dissipation holes.

Do not put this device close to a heat source or under a high temperature
occurs. Keep the device away from direct sunshine.

Do not put this device close to an overdamp or watery place. Do not spill
fluid on this device.

Do not connect this device to a PC or electronic product unless instructed
by our customer engineer or your broadband provider. Wrong connection
may cause power or fire risk.

Do not place this device on an unstable surface or support.

1.3 LEDs and Interfaces

Front Panel
The following table describes the LEDs of the device.
LED
Power
LAN
1/2/3/4
WLAN
Figure 1 Front panel
Color Status
Off
Green
On
On
Red
Blinking
Off
Blinking
Green
On
Blinking
Green
On
Description
The power is off.
The power is on and the initialization is
normal.
The device is initiating.
The firmware is upgrading.
No LAN link.
Data is being transmitted through the
LAN interface.
The connection of LAN interface is
normal.
Data is transmitted through the WLAN
interface.
The connection of WLAN interface is
normal.
2