Measurement Screen Description - Nidek Medical NT-510 Operator's Manual

1.5

Measurement Screen Description

The screen has Page 1 and Page 2.
<When Page 1 is displayed>
Patient's eye
Target
Auto button
Measured values
Patient's eye
Indicates the right or left eye of the patient.
Target ( )
Used as a guide to position the patient's eye in the center of the screen during the NT measurement.
Auto button ( )
Selects the auto-tracking function and auto-shooting function.
Select auto-tracking from
Measured values
Three pieces of measured data are shown. The latest measured data is shown at the top and the older data
is shown under the latest data.
The data in the bottom line preceded by "AV" is the average data.
"/ number" appended to the average data represents the number of items of measured data used for averaging.
Auto-tracking mark
This mark indicates that the auto-tracking (alignment in the
NT-510 displays
(No indication)
Auto-tracking mark
Auto-shooting mark
R: Right eye
or OFF. Select auto-shooting from
or Manual (No indication).
Auto-tracking in the up-and-down directions is turned on.
Manually align the device and bring the eye into focus.
BEFORE USE Measurement Screen Description
ID indication
L: Left eye
or OFF.
direction) is turned on.
up-and-down
1
Applanation area
Charge indicator
Measurement range
button
Focusing indicator
Eyelid detection mode
button
Page button
Measurement range
9