Setting Other User Numbers; User Entry - Zte MF58 User Manual

White list
The AD number should be set in WCDMA network, using a local number. An attempt to set the
number from outside local network using a mobile roaming or IDD service will result in an invalid
number being saved in the white list.

3.3 Setting other user numbers

In addition to the AD, other phone numbers will be added to the white list (maximum 20 numbers in
the white list, except the AD) when making a video call to the Mobile Cam with a correct PIN code
entered.
First, make a video call to the Mobile Cam using a non-AD number.
When the call connects, the screen will prompt you to enter a PIN code. A "beep" sound from the
Mobile Cam indicates that the video call has been successfully connected. If you make 3 consecutive
incorrect PIN code entries, or have not been able to enter the PIN code within 60 seconds, the
Mobile Cam will be disconnected automatically. If the PIN code is valid, the user will enter the
video call interface.
The AD can also set the other user number via the video phone menu or SMS commands (see
Section 5.1, 5.2). AD can also set validation for non-white list users (see Chapter 5).

3.4 User entry

White list user: Phone numbers added to white list (including AD number). The white list user can
dial the mobile camera without the need to input a PIN (this function depends on the SMS setting).
Non-white list user: If the white list is not full, and the non-white list user dials up the Mobile Cam
using the correct PIN code, the caller's phone number will be added to the white list automatically.
If the number of phone numbers in the white list has reached 20, the Mobile Cam will refuse to
accept non-white list users (this function depends on AD settings).
20