Getting Started; Sim/Usim Card - Zte MF58 User Manual

2.5 Getting started

Make sure you follow the operation procedure before using the Mobile Cam.
Insert a 3G SIM/USIM card.
The battery should be fully charged before you use the Mobile Cam, otherwise the Mobile Cam
may not function correctly.
Set date and time. See details in Section 5.2.

2.5.1 SIM/USIM card

Be sure to insert a 3G SIM/USIM card before you use the Mobile Cam.
Note:
A SIM/USIM card set with PIN code cannot be used normally in the Mobile Cam. You need to
disable the PIN code of the SIM/USIM card before using it in the Mobile Cam.
Make sure to disconnect the charger and switch off your Mobile Cam before inserting or
removing your SIM/USIM card.
Inserting SIM/USIM card
1. Make sure your charger is disconnected, then press and hold down Power key until the
Mobile Cam is powered off.
2. Pull out the plastic plug covering the SIM/USIM card slot.
3. Insert the SIM/USIM card, with the metal surface facing downward and the bevel end inward,
until you hear "a cracking sound".
4. Insert the plastic plug back into the SIM/USIM card slot to keep it from dust.
Getting to know your Mobile Cam
13