Table of Contents
Advertisement
OWNER'S MANUAL
6V Electric Car
THIS MANUAL CONTAINS IMPORTANT SAFETY, PERFORMANCE AND
MAINTENANCE INFORMATION. READ THE MANUAL BEFORE ALLOWING
YOUR CHILD TO RIDE YOUR NEW ELECTRIC RIDE-ON TOY.
KEEP THE MANUAL HANDY FOR FUTURE REFERENCE.
FOR AGES 3 -5 YEARS
MAXIMUM WEIGHT: 55 lbs. (25 kgs)
NOTE: Illustrations in this Manual are for reference purposes only and may not reflect the exact
appearance of the actual product. Specifications are subject to change without notice.
DO NOT RETURN TO STORE!
QUESTIONS OR COMMENTS?
1-800-288-1560
Advertisement
Table of Contents
Related Manuals for Dynacraft ultimate spider-man
Summary of Contents for Dynacraft ultimate spider-man
- Page 1 OWNER’S MANUAL 6V Electric Car THIS MANUAL CONTAINS IMPORTANT SAFETY, PERFORMANCE AND MAINTENANCE INFORMATION. READ THE MANUAL BEFORE ALLOWING YOUR CHILD TO RIDE YOUR NEW ELECTRIC RIDE-ON TOY. KEEP THE MANUAL HANDY FOR FUTURE REFERENCE. DO NOT RETURN TO STORE! STOP QUESTIONS OR COMMENTS? 1-800-288-1560...
- Page 2 TABLE OF CONTENTS Introduction, Safety and Warnings Before You Begin Assembly List of Assembled Parts Assembly How to Use Your Vehicle Detailed Maintenance and Repair Troubleshooting Guide Warranty ELECTRIC CAR SPECIFICATIONS SUITABLE AGE 3-5 Years CAPACITY Up to 55lbs (25kgs) SPEED 2.5 mph CHARGER / INPUT...
- Page 3 INTRODUCTION, SAFETY, AND WARNINGS ABOUT THIS MANUAL: This Manual was written to help you and your child get the most performance, comfort, enjoyment and safety when riding your new electric ride - on toy. It is important for you to understand your new electric ride-on toy. By reading this manual before you let your child go out on his/her first ride, you will know how to get the most from your new electric ride-on toy.
- Page 4 Always wear appropriate clothing and shoes, including long sleeved shirts and long pants and lace-up or similar shoes with rubber soles. Never ride barefoot or in sandals and make sure that shoelaces or other fasteners are tied and kept away from the wheels and drive system of the ride-on toy.
- Page 5 SAFE RIDING PRACTICES AND WARNINGS Check and obey all local laws or regulations which may be in effect in the locations where the electric ride-on toy may be used. Always wear a helmet and other safety equipment and appropriate clothing and ...
-
Page 6: Using The Charger
Do not to allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with wheels or other moving parts. Before each cycle of operation, you must perform the preoperation checks specified in this manual or by the manufacturer, including. That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;... - Page 7 BEFORE YOU BEGIN ASSEMBLY WARNING Remove all packing and items from the display box. Make sure that the power switch is turned “OFF” before assembling the electric ride-on toy. ESTIMATED ASSEMBLY TIME You should allow approximately 35 minutes for assembly, not including initial charging time.
- Page 8 PARTS DIAGRAM...
- Page 9 ASSEMBLY Your new vehicle requires adult assembly. Please set aside around 35 minutes for assembly. Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. Tools Required: 17mm Socket Wrench Phillips Screwdriver Standard slip joint pliers (included)
-
Page 10: Steering Column Assembly
3. Driving Wheel Assembly Slide the gear box through the axle into the vehicle body, make sure the motor and motor power wire are inserted into the vehicle body. Note: The gear box must be installed onto the Right side of vehicle (riding position). Slide the driving wheel onto the axle and make it match up with the gear box. - Page 11 8. Steering Wheel Assembly Remove the M5×35 machine screw and M5 nut from the steering wheel with a screwdriver. Insert the steering wheel onto the end of the steering column, line up the hole in the steering wheel and the hole in steering column, insert the M5x35 machine screw and M5 nut back as shown and tighten it with a screwdriver.
- Page 12 12. Seat Assembly Insert the tabs on the back of seat into the slots in the vehicle body. Insert two M4x12 machine screws, and tighten securely with a screwdriver. 13. Rear Bar Assembly Insert the rear bar onto the tail of the vehicle in the correct direction as shown, and push down on the rear bar, to secure it on the vehicle as shown...
-
Page 13: Battery Charging
BATTERY CHARGING IMPORTANT! Before first time use, charge the battery for at least 18 hours. Charge the battery for at least 12 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Over charging or undercharging the battery may shorten battery life and decrease vehicle running time. - Page 14 Do not charge the battery on a surface (such as a kitchen counter top) which could be damaged by the acid contained inside the battery. Take precautions to protect the surface on which you charge your battery. Use only an original charger (120VAC 60Hz) with an output of 6 VDC (500mA) to charge your vehicle battery.
- Page 15 HOW TO USE YOUR VEHICLE FORWARD 1. Move the “Forward - Backward switch” into the “Forward” position. 2. Press the “Foot Pedal”, and the vehicle will move forward. STOP The vehicle will stop automatically when you d l i s ’ “...
- Page 16 IMPORTANT Always stop vehicle when changing the direction to avoid damage to the gears and motor. This vehicle has an adjustable seat belt; please instruct children on how to fasten the seat belt before using. Do not let any child touch the wheels or be near them when the car is moving.
- Page 17 DETAILED MAINTENANCE AND REPAIR Turn power “OFF” before conducting any maintenance procedures. Tools Required: Flat head Screwdriver 17mm Socket Wrench (not included) (included) HOW TO REPLACE FRONT WHEELS & REAR LEFT WHEEL Remove the Axle Cap with a flat head screwdriver. Remove the M10 locknut with a 17mm socket wrench.
- Page 18 HOW TO REPLACE DRIVING WHEEL AND GEAR BOX 1. Remove the Axle Cap with a flat head screwdriver. 2. Remove the M10 locknut with a 17mm socket wrench. 3. Remove the Ø10 washer. 4. Remove the wheel cover and rear driving wheel, and replace with a new one. If you do not need to replace the gear box, please proceed to step 9.
- Page 19 HOW TO REPLACE THE POWER SWITCH & FORWARD-BACKWARD SWITCH Remove the forward-backward switch (or power switch) with a flat head screwdriver (not included). <see Figure 1-1 & 2-1> Unplug the main connector from the forward-backward switch socket <see Figure 1-2 & 2-2> (or power switch socket) as shown.
- Page 20 BATTERY CARE AND DISPOSAL Do not store the battery in temperatures above 75° F (23.5° C) or below 32° F (0°C). THIS PRODUCT CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE RECYCLED IN ACCORDANCE WITH YOUR LOCAL AND STATE LAWS. PLEASE CAREFULLY READ AND UNDERSTAND THE FOLLOWING DISPOSAL INSTRUCTIONS: Disposal: This product contains sealed lead acid batteries which must be disposed of...
- Page 21 MAINTAINING YOUR VEHICLE Occasionally use a lightweight oil to lubricate moving parts such as wheels and the steering linkages. Park the vehicle indoors or cover it with a tarp to protect it from wet weather. Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic parts may melt.
-
Page 22: Troubleshooting Guide
Replace only with an original 6 Volt (4.0 Amp/Hr.) battery with built-in thermal fuse. Do not use non- original substitute parts. Visit the Dynacraft website and replace with Motor damage a new motor. Check all wires and connectors. Make sure... - Page 23 Problem Possible Cause Solution Tripped thermal fuse The built-in thermal fuse may “trip” and shut down operation of the vehicle if the vehicle is overloaded or the driving conditions are too severe. Once a fuse has “tripped”, SET THE POWER SWITCH TO THE "OFF" POSITION AND DO NOT CONTINUOUSLY PUSH ON THE FOOT PEDAL.
- Page 24 Problem Possible Cause Solution Vehicle runs sluggishly Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle for the first time. After first- time use, recharge the battery for at least 12 hours after each use.
-
Page 25: Limited Warranty
Parents that allow their children to ride taking such actions will assume th eir own risk and the risk of injury to their children, and Dynacraft will not be responsible. THE PURCHASE OF THIS ELECTRIC RIDE-ON TOY WILL CONFIRM THE BUYER’S AGREEMENT THAT DYNACRAFT’S LIABILITY UNDER THIS WARRANTY SHALL BE NO... - Page 26 Having this information is required and helps us handle your call more effectively. DO NOT return this item to the store. STOP Please call Dynacraft for assistance. Dynacraft BSC, Inc. 2014 Printed in China 89 S. Kelly Rd., American Canyon, CA 94503 Call Toll Free 1.800.288-1560...