Dynacraft 12V DUNE BUGGY Owner's Manual
  1. Manuals
  2. Brands
  3. Dynacraft Manuals
  4. Golf Cars
  5. 12V DUNE BUGGY
  6. Owner's manual
Dynacraft 12V DUNE BUGGY Owner's Manual

Dynacraft 12V DUNE BUGGY Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

OWNER'S MANUAL
FOR ELECTRIC RIDE-ON VEHICLES
This manual contains important safety, performance and maintenance
information. Read the manual before taking your first ride on your new
ride-on vehicle, and keep the manual handy for future reference.
REGISTER
your bike online at www.dynacraftwheels.com

Advertisement

Table of Contents
loading

Related Manuals for Dynacraft 12V DUNE BUGGY

Summary of Contents for Dynacraft 12V DUNE BUGGY

  • Page 1 OWNER’S MANUAL FOR ELECTRIC RIDE-ON VEHICLES This manual contains important safety, performance and maintenance information. Read the manual before taking your first ride on your new ride-on vehicle, and keep the manual handy for future reference. REGISTER your bike online at www.dynacraftwheels.com...
  • Page 2 OWNER’S MANUAL 12V DUNE BUGGY this manual contains important safety performance and maintenance information read the manual before taking your first ride or allowing your child to ride your new electric ride on toy keep the manual handy for future reference...
  • Page 3 TABLE OF CONTENTS A Introduction, Safety and Warnings B Before You Begin Assembly C Parts Diagram D Assembly E How to Use Your Vehicle F Special Features Spiderman Water Cannon (applies only to Spiderman Dune Buggy) G Detailed Maintenance and Repair H Troubleshooting Guide I Warranty ELECTRIC CAR SPECIFICATIONS...
  • Page 4 INTRODUCTION, SAFETY AND WARNINGS ABOUT THIS MANUAL: This Manual was written to help you and your child get the most performance, comfort, enjoyment and safety when riding your new electric ride-on toy. It is important for you to understand your new electric ride-on toy.
  • Page 5 RIDER USE AND REQUIRED PARENTAL SUPERVISION RIDERS MUST NOT EXCEED THE WEIGHT LIMIT OF 130 pounds (59kg) and MUST BE OVER 3 years old. The age grade for the electric ride-on toy is for 3 years and older. Just because your child is within the age and weight limitations specified for the electric ride- on toy, does not mean that his/her size is appropriate to fit or maintain control of the electric ride-on toy, or that he/she is capable of safely operating the electric...
  • Page 6 SAFE RIDING PRACTICES AND WARNINGS • Check and obey all local laws or regulations which may be in effect in the locations where the electric ride-on toy may be used. • Always wear appropriate clothing and shoes. • Observe the age and weight limitations on the cover of this manual. •...

  • Page 7: Using The Charger

    • Do not to allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with wheels or other moving parts. • Avoid sharp bumps, drainage grates, and sudden surface changes. PRE-RIDE SAFETY CHECKLIST • Check to make sure that all components are properly secured and are functioning according to the manufacturer’s specifications.
  • Page 8 BEFORE YOU BEGIN ASSEMBLY WARNING: Remove all packing and items from the display box. Make sure that the power switch is turned "OFF" before assembling the electric ride-on toy. ESTIMATED ASSEMBLY TIME You should allow approximately 35 minutes for assembly, not including initial charging time.
  • Page 9 PARTS DIAGRAM Tools Required Screwdriver (not included) Pliers (not included) Socket Wrench (included) Socket Wrench NOTE: Some parts shown are assembled on both sides of vehicle. Vehicle body x 1 12 M10 Nut x 4 Right Headrest x 1 13 Axle Cap x 4 Left Headrest x 1 14 Front wheel x 2 M5 x 40 Machine Screw x 1...
  • Page 10 ASSEMBLY Your new vehicle requires adult assembly. Please set aside around 35 minutes for assembly. Please identify all parts before assembly and save all packaging material until assembly is completed to ensure that no parts are discarded. TOOLS REQUIRED: Phillips Screwdriver Needle-nose pliers (not included) (not included)
  • Page 11 2. FRONT WHEEL ASSEMBLY Wheel Ø12 Washer locknut • Remove all parts from the front axle. • Fit a Ø12 washer onto the axle. • Fit a bushing onto the axle. • Slide the wheel onto the axle, making Wheel sure the bushing matches inside the Axle cap axle...
  • Page 12 4. DRIVING WHEEL ASSEMBLY • Adjust the rear axle to make sure the same amount is exposed on both sides of the car body. • Slide one driving wheel onto the rear axle, matching it to the gearbox. Rear axle Driving wheel •...

  • Page 13: Steering Column Assembly

    5. STEERING COLUMN ASSEMBLY • Turn the vehicle on its side as shown in the diagram. • Slide a Ø10 washer onto the steering column from the longer end. • Insert the longer end of steering column shaft through the bottom hole in the front of vehicle body until it sticks out of the hole in the dash.
  • Page 14 8. INSTALLING THE STEERING Battery compartment door WHEEL BATTERIES NOTE: Batteries are not included • Loosen the screw in the steering wheel and remove the cover. • Insert 2 X 1.5V size AA AM-3 or LR6 batteries as shown. • Replace the cover and tighten the screw to secure it in place.

  • Page 15: Battery Charging

    9. POWER SUPPLY CONNECTION NOTE: The battery is disconnected for shipment to prevent the battery from draining. • Loosen the two screws on battery cover with Phillips screwdriver. • After opening the battery cover, you will find two connectors at right inside the battery compartment.
  • Page 16 PREVENT FIRE • Never modify the electrical system. • Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. • Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury.
  • Page 17 • NOTE TO ADULTS: Regularly examine the charger for damage to the cord, plug, housing or other parts that may result in the risk of fire, electric shock or injury. • If your battery is old and will not accept a charge, do not leave it in the vehicle. Always remove a dead battery from the vehicle.
  • Page 18 HOW TO USE YOUR VEHICLE Sound Button Foot Pedal Forward Backward Shift Lever Power Switch POWER SWITCH Turns the vehicle on and off. FORWARD-BACKWARD SHIFT LEVER • To move the car forward at high speed, shift the lever to “High” position. •...
  • Page 19 IMPORTANT Always stop the vehicle when changing the direction to avoid damage to the gears and motor. • This vehicle has an adjustable seat belt; please instruct children on how to fasten the seat belt before using. • Do not let any child touch the wheels or be near them when the car is moving. •...
  • Page 20 SPECIAL FEATURES NOTE: These features are specific to the model that was purchased and may vary. 12V SPIDERMAN WEB RIDER DUNE BUGGY Parts Diagram on Water Cannon: 1. Water Cannon Cage 2. Firing Button 3. Cannon Handle 4. Fastening Clip 5.
  • Page 21 INSTALLATION OF THE WATER CANNON With the cannon aiming toward the front, insert the cannon support into the hole in the vehicle body as shown and push until you hear a “click” sound to ensure the cannon support is securely attached. HOW TO USE WATER CANNON 1.
  • Page 22 FILLING THE WATER CANNON 1. Rotate the water can cover counterclockwise to open. 2. Remove the water can lid (A). 3. Add clean water into the water can. 4. Replace the water can cover and re-tighten the water can cover by turning it clockwise. 5.
  • Page 23 DETAILED MAINTENANCE AND REPAIR Turn the power “OFF” before conducting any maintenance procedures. TOOLS REQUIRED: Flat head Screwdriver 17mm Socket Wrench (not included) (included) HOW TO REPLACE FRONT WHEELS Wheel Ø12 Washer M10 locknut Wheel axle Bushing Ø12 Washer Axle cap 1.
  • Page 24 HOW TO REPLACE THE DRIVING WHEEL AND GEAR BOX Driving wheel Cable Ø12 washer connector Motor connector locknut Axle cap Rear axle FRONT Gear box 1. Turn the vehicle body upside down 2. Remove the axle cap with a flat head screwdriver. 3.
  • Page 25 HOW TO REPLACE THE POWER SWITCH Power Switch Power switch Power socket Switch 1. Remove the power switch with a flat head screwdriver. (Not included) 2. Unplug the main connector from the power switch socket as shown. 3. Plug in then new power switch for replacement. HOW TO REPLACE THE FOOT PEDAL 1.
  • Page 26 BATTERY CARE AND DISPOSAL Do not store the battery in temperatures above 75° F (23.5° C) or below 32° F (0°C). THIS PRODUCT CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE RECYCLED IN ACCORDANCE TO YOUR LOCAL AND STATE LAWS PLEASE CAREFULLY READ AND UNDERSTAND THE FOLLOWING DISPOSAL INSTRUCTIONS: DISPOSAL: This product contains sealed lead acid batteries which must be...
  • Page 27 MAINTAINING YOUR VEHICLE Occasionally use a lightweight oil to lubricate moving parts such as wheels and the steering linkages. Park the vehicle indoors or cover it with a carpet to protect it from wet weather. Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic parts may melt.

  • Page 28: Troubleshooting Guide

    If your battery is old or if you have not followed Battery Care instructions, your battery may be dead. Replace only with an original 12 Volt (10 Amp/Hr.) battery. Do not use non-original substitute parts. Motor damage Visit the Dynacraft website and replace with a new motor. www.dynacraftwheels.com...
  • Page 29 Replace only with an original 12 Volt (10 Amp/Hr.) battery. Do not use non-original substitute parts. Motor damage Visit the Dynacraft website and replace with a new motor. www.dynacraftwheels.com Tripped fuse The fuse may “trip” and shut down operation of the vehicle if the vehicle is overloaded or the driving conditions are too severe.
  • Page 30 Problem Possible Cause Solution Vehicle runs Undercharged battery Charge the battery. A new battery should sluggishly have been charged for at least 18 hours before using the vehicle for the first time. After first-time use, recharge the battery for at least 12 hours after each use. Never charge the battery longer than 30 hours.

  • Page 31: Limited Warranty

    Dynacraft shall not have any responsibility for any resulting break down of the ride-on toy or its components, or for any rider injuries...
  • Page 32 Dynacraft Customer Service 1-800-288-1560 7AM to 4PM Pacific Standard Time DO NOT return this item to the store. STOP Please call Dynacraft for assistance. Please have the following information available when you call: Model Number: (sample: 8802-33) Production Date: (sample: 03.03.2015)
  • Page 33 Please visit dynacraftwheels.com for more information. Or call Customer Service at 1-800-288-1560, 7AM to 4PM PST. Please have the following information available when you call: Model Number: (example: 8XXX-XX) Production Date: (example: 2014.XX.XX) Serial Number: (example: XXXXXXXXXXX) 2015 Printed in China...

Table of Contents