AMD ATI Radeon HD 4600 Series User Manual page 16

10
Caution:
Remember to discharge your body's static electricity by touching the
power supply case or the metal surface of the computer chassis.
4.
Remove any unneeded graphics cards from the computer.
Warning:
Some graphics cards can get hot while operating. Wait approximately five
minutes after turning off the computer before touching the card.
5. Locate the PCIe slots on the motherboard. If necessary, remove the
corresponding back panel cover.
6.
Align the new graphics card in the secondary PCIe slot next to the existing
graphics card and press firmly until the card is fully seated.
➭
Figure 2–1 ATI CrossFireX Installation
ATI Radeon HD 4600 Series
If using a 3-card configuration, align the third graphics card in the third
PCIe slot next to the existing graphics card and press firmly until the
card is fully seated.
ATI CrossFireX Technology
© 2008 Advanced Micro Devices, Inc.