Related Manuals for Rustibus 040-1000
Summary of Contents for Rustibus 040-1000
- Page 1 OPERAtiON MANuAl 040-1000 Rustibus® 400 ElEctRic 3 Phase 220/380/440 V - 50 or 60/50/60 Hz 3 x 380/440 V - 50/60 Hz 3 x 220 V - 50 Hz 3 x 220 V - 60 Hz...
-
Page 2: Declaration Of Conformity
Machine may vary from pictures Genuine Rustibus® parts only! DEclARAtiON OF cONFORMitY DEclARAtiON OF cONFORMitY Manufacturer: Manufacturer: Dalseide shipping services As Dalseide shipping services As bekkjarviksundet 1 bekkjarviksundet 1 N-5397 bEKKJARViK N-5397 bEKKJARViK NORWAY NORWAY The authorised representative The authorised representative... - Page 3 If they are not there, they’re not GENUINE PARTS. Use only the best, don’t settle for less. RUSTIBUS® If they are not there, they´re not genuine spares. Use only the best, don´t settle for less.
- Page 4 Machine may vary from pictures Genuine Rustibus® parts only! HElPFul iDENtiFiERs in addition to information on installation and operation, this instruction manual may contain WARNiNGs and cAutiONs pertaining to user safety, and NOtEs on important, useful operating guidelines. A WARNiNG indicates a potentially hazardous situation, which if not avoided, could result in death or serious injury.
- Page 5 Never operate the Rustibus® de-scaling tool while wearing loose hanging chains, hanging iD/security badges or garments that may be caught in the rotating parts. Never start the Rustibus® de-scaling machine before it´s cables or hoses are properly secured and safely located.
-
Page 6: Safety Considerations
• ALWAYS THINK SAFETY FIRST WHEN oPERATINg MAcHINE. bEFORE stARtiNG tHE OPERAtiON congratulations on your new Rustibus® de-scaling machine. in order to ensure your full benefit and safety of operation we recommend you to read this operation manual carefully before starting. - Page 7 Step 4: oPERATIoN oF RUSTIBUS® MAcHINE. • For the best results from your Rustibus® machine you should run the machine forward and backward over the area until appropriate result is achieved • Do not run the machine over sharp edges, but along them. Your machine will last longer if operated with care.
- Page 8 (2). the entire handle can be adjusted to fit various positions (3), depending on users requirements for comfort or operation area. the Rustibus® 400 unit uses a Disposable chain Drum. this chain Drum is designed for one-time-use only and does not require any spares replacement.
- Page 9 Genuine Rustibus® parts only! REPlAciNG tHE cHAiN DRuM Rustibus®400 machines is fitted with a protective cover. this cover offers the operator greater protection; decreases the spreading of waste and debris and increases the efficiency of the vacuum system when used on the machine.
- Page 10 Genuine Rustibus® parts only! Machine may vary from pictures REPlAciNG tHE cHAiN DRuM to use the Disposable chain Drums, an adapter is required (040-0157). this is mounted on the shaft of the electro motor. When replacing chain Drums (040-0156) check and tighten bolts on adaptor first and put the chain drum on.
- Page 11 Machine may vary from pictures Genuine Rustibus® parts only! Rustibus® 400 tHREE PHAsE MAcHiNE THE RUSTIBUS® 400 cAN BE DELIVERED WITH THE FoLLoWINg VoLTAgES: 3 x 220 / 380 / 440V - coNNEcTIoN EL- MoToR: Connection on El - Motor:...
- Page 12 Machine may vary from pictures Genuine Rustibus® parts only! sPARE PARt list – Rustibus® 400 040-0012 040-0013 040-0020 040-0010 040-0202 040-0158...
- Page 13 HEAVy DUTy WIRE BRUSH (TWISTED WIRE) cONtENts iN stARtER bOx the starter system in the starter box on the Rustibus® 400 is preinstalled for the specific voltage upon delivery. if the voltage is to be changed on the machine, the starter system must be adjusted or replaced accordingly.
-
Page 14: Additional Features
Genuine Rustibus® parts only! ADDitiONAl FEAtuREs Rustibus® 400 VAcuuM sYstEM the Rustibus® 400 machine features a newly modelled vacuum system attachment. it is built right into the very foundation of the machine itself. its vacuum port has been designed to be easy to use and not get in the way or hinder the operation of the machine. - Page 15 50 M cable 2x1,5 + E 040-3000 Rustibus® 400-Air, Complete W/Air filter-lubricator & Regulator 040-X3000 Rustibus® X400 Air (EX), Complete W/Air filter-lubricator & Regulator 040-5000 Rustibus® 400, Complete single Phase-110V – 60Hz incl. 50 M cable 2x1,5 + E...
- Page 16 Dalseide Shipping Services cannot be held liable for any damages (to Rustibus® machines or personnel) as a result of use of non genuine parts. We reserve the right to refuse any claims on parts or Rustibus® machinery unless it can be proven that genuine parts only have been used on Rustibus® machines.
-
Page 17: Contact Information
Machine may vary from pictures Genuine Rustibus® parts only! cONtAct iNFORMAtiON NoRWAY: Dalseide Shipping Services AS Bekkjarviksundet 1 No - 5397 Bekkjarvik Norway Tel: + 47 5618 1200 Fax: + 47 5618 1201 E-mail: bergen@rustibus.com ANTWERP: Rustibus N.V. Noordersingel 7...
Need help?
Do you have a question about the 040-1000 and is the answer not in the manual?
Questions and answers