Page 1
EP HENRY FIRE PIT INST LL TION GUIDELINES E X C E L L E N C E S I N C E 1 9 0 3...
Page 2
Each course will require 16 blocks to complete. You compacted stone base needs to exceed the exterior can build the fire pit wall 7 courses high or to a lower circumference of the fire pit by 6”on all sides so you height if so desired.
Page 3
CONCRETE SLAB PAVER The bottom of the fire pit cavity should then be CONSTRUCTION: When building your fire pit filled with clean sand to a depth of 4”. This will help on top of a concrete slab or paver surface, it is...
Page 4
Make sure the fire pit wall. If any block are out of alignment or the excavated soil surface is smooth and level. the circle is distorted, tap the blocks into place with Thoroughly compact the soil surface.
Page 5
| FIRE PIT INST LL TION GUIDELINES FREE STANDING INSTALLATION 1) Prep aggregate base and sand setting 2) Lay first course of block. 3) Level. bed. 4) Make sure first course is perfectly level 5) Lay second and additional courses.
Page 6
If you opt to drill the drainage hole, the filtration Backfill the exposed compacted stone in the overdig membrane and sand needs to be installed in the area with soil or decorative stone.
Page 7
Do not light • Make sure that there are no overhanging objects a fire in the fire pit for at least 48 hours to allow any such as tree branches, canopies, cantilevered roof adhesive to cure properly and for potentially structures, or other elements that are flammable flammable fumes to dissipate.
Page 8
Please refer to our catalog, visit us at www.ephenry.com or call 800-444-3679 for full details. The hardware components – copper bowl, grills, spark screen and poker – are not manufactured by EP Henry and therefore, not covered by our Lifetime Guarantee.
Need help?
Do you have a question about the FIRE PIT and is the answer not in the manual?
Questions and answers