Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for EP HENRY COVENTRY WALL FIRE PIT KIT
Summary of Contents for EP HENRY COVENTRY WALL FIRE PIT KIT
- Page 1 COVENTRY WALL FIRE PIT KIT INSTALLATION GUIDELINE...
- Page 2 Contact your EP Henry Authorized Hardscaping Please make sure all components are in place Distributor® immediately if any components are before you begin to assemble. Your EP Henry Fire missing or damaged upon opening. Proof of Pit Kit should contain the following items: purchase must be provided for any claim to be recognized.
- Page 3 MARKING OUT THE CONSTRUCTION level. Thoroughly compact the soil surface. Geotextile (Mirafi 500 or 140 N) is recommended as a separation membrane Establish the location where the fire pit is to be built. Mark the on top of the soil surface and up the sides of the excavation center of that location.
- Page 4 Read all safety recommendations carefully. Before assembling on to the surrounding surfaces. To reduce the problems caused your EP Henry Fire Pit read all of the instructions and installation by ash being blown out of the fire bowl or washed out by rain, guidelines.
- Page 5 COVENTRY WALL FIRE PIT KIT INSTALLATION GUIDELINE COVENTRY WALL FIRE PIT KIT INSTALLATION DETAIL COVENTRY WALL FIRE PIT KIT CROSS-SECTION 800.44.HENRY | ephenry.com...
- Page 6 The EP Henry fire pit wall block and caps are not fire rated and are not designed to be used without the fire bowl properly in place.
Need help?
Do you have a question about the COVENTRY WALL FIRE PIT KIT and is the answer not in the manual?
Questions and answers