Download Print this page

EP HENRY CAST STONE WALL SQUARE FIRE PIT KIT Installation Manualline

Download this manual

CAST STONE WALL SQUARE FIRE PIT KIT

INSTALLATION GUIDELINE

Need help?

Do you have a question about the CAST STONE WALL SQUARE FIRE PIT KIT and is the answer not in the manual?

Page 1 CAST STONE WALL SQUARE FIRE PIT KIT INSTALLATION GUIDELINE...
Page 2 IMPORTANT: BE SURE TO READ ALL SAFETY GUIDELINES BEFORE INSTALLING OR USING YOUR EP HENRY FIRE PIT. THE WALL BLOCK AND CAPS OF THE EP HENRY FIRE PIT ARE NOT FIRE RATED. DO NOT ALLOW FLAMES TO COME IN DIRECT CONTACT WITH THE BLOCKS OR CAPS.
Page 3 PLANNING THE CONSTRUCTION NOTE: Excavate and remove all sod and organic soils in the interior of the footer excavation to the depth required. Establish the location where the fire pit is to be built. Mark the center of that location. Then mark out the 50″ x 50″ Shovel in the stone for the base and spread it evenly in square footprint of the fire pit.
Page 4 Measure the EP Henry Square Fire Pit is not designed for huge bon fires. distance from the top edge of the fire box to the top of the fire Make sure that the fires you light are kept relatively small for pit walls.
Page 5 CAST STONE WALL SQUARE FIRE PIT KIT INSTALLATION GUIDELINE CAST STONE WALL SQUARE FIRE PIT KIT INSTALLATION DETAIL CAST STONE WALL SQUARE FIRE PIT KIT CROSS-SECTION 800.44.HENRY | ephenry.com...
Page 6 Always use fire resistant gloves when placing wood into the fire, or cooking on the grilling racks. Read all safety recommendations carefully. Before assembling your EP Henry Fire Pit read all of the instructions Always have a source of water or fire extinguisher available in and installation guidelines.