Seiko Data-2000 Instructions Manual page 10

5
6
Key
operation
SB
Character/
symbol key
Display
<rr — ^
•": Sennce
'" Center
3-1,Ginza
4-cl
one
o- 'j
•
"rWTORl
SEIKO
Tfik'vn
I
91)
Remarks
Depress the 1 t 1 key when the cursor is on
the top line, and the display changes in the
opposite direction to the 1 4- 1 key.
By keeping the 1 t 1 key depressed the dis-
play changes by 4 lines until a line of 10
asterisks is displayed following the first line.
The cursor moves with each depression of
the F^n or I <- I key in the direction indi-
cated by the respective arrows.
When the cursor moves to the extreme
right or left position of a line, it automati-
cally goes to the next line.
Depress the Q] , CD , E3 .or GE] key, and
the cursor moves in the direction indicated
by the respective arrows.
Move the cursor to select the memo input
space where the character/symbol is to be
entered.
How to input and record data
Depress the character/symbol key, and the
character/symbol is input and recorded at
that space where the cursor is located.
7
8
Key
operation
Q
or
I — »• |
or
or
Character/
symbol key
rfp5ra-'"
1=
**jfi
B
Display
SEIQJ
SEIHfl
ff 17-1 ft (. ""
SFiTUPDfiY
!'Vii''ir
Remarks
• To enter the alphabet characters in small
letters or to enter the symbols in the up-
per left corner of their respective keys,
depress the keys while keeping the |SFT|
(shift) key depressed.
• To enter a blank (space), depress the
ISPACEI key.
• To start a new line, depress the [RETURN!
key.
How to correct the input character/symbol
1. Move the cursor to the character/symbol
to be corrected.
2. Depress the correct key.
To clear data that is no longer needed, move
the cursor to where the character/symbol is
located and depress the [SPACE] key over
it. Also, entering new data where other in-
formation exists will automatically erase the
previously recorded information.
After the data input is completed, depress
button "B" of the watch.
The display returns to the time/calendar dis-
play, and data reception from the keyboard
is over.
Turn the keyboard's power switch "off",
and then remove the watch from the key-
board.