Anti-Theft Alarm - Ford FOCUS ELECTRIC 2015 Owner's Manual

2
E184385
1. Open the floor console storage
compartment lid.
2. Remove the tray.
E184386
3. Place the first programmed intelligent
access key flat on the symbol at the
bottom of the floor console storage
compartment.
4. Press the START STOP button.
5. Wait five seconds and then press the
START STOP button again.
6. Remove the intelligent access key.
Focus (CDH), enUSA, First Printing
Security
7. Within 10 seconds, place a second
programmed intelligent access key flat
on the symbol.
1
8. Press the START STOP button.
9. Wait five seconds and then press the
START STOP button again.
10. Remove the intelligent access key.
11. Within 10 seconds, place the
unprogrammed intelligent access key
flat on the symbol.
12. Press the START STOP button.
Programming is now complete. Check that
the remote control functions operate and
your vehicle starts with the new intelligent
access key.
If programming was unsuccessful, wait 10
seconds and repeat Steps 1 through 12. If
programming remains unsuccessful, have
your vehicle checked by an authorized
dealer.
3

ANTI-THEFT ALARM

The system will warn you of an
unauthorized entry to your vehicle. It will
be triggered if any door, the luggage
compartment or the hood is opened
without using the key, remote control or
keyless entry keypad.
The direction indicators will flash and the
horn will sound if unauthorized entry is
attempted while the alarm is armed.
Take all remote controls to an authorized
dealer if there is any potential alarm
problem with your vehicle.
Arming the Alarm
The alarm is ready to arm when there is
not a key in your vehicle. Electronically lock
your vehicle to arm the alarm.
65