Philex SLX 28100HSG User Manual

28100HSG
Introduction
Special features include:
•
This signal booster is 4G Ready - which means it
removes interference and channel loss from your
TV caused by 4G mobile phone signals
•
Flat gain response across the full frequency
spectrum ensures optimum digital reception
•
Surge protection
•
Side mounted terminals provide easy cable
management
•
Short circuit protection
•
Full VHF compatibility for TV and FM/DAB
Installation for TV and Radio Signal Distribution
Note: If you are plugging your SLx Gold
booster into a twin socket it is
recommended that it is plugged into
the right hand socket so that connected
flyleads do not obstruct the other socket.
WARNING: Do not plug appliances
into the booster mains socket which
are rated at more than 13A or 3000W.
TV Signal Distribution
1. Connect your UHF aerial downlead
flylead from aerial outlet to the INPUT
socket on the booster.
2. Connect your TV or set top box to
socket 1 (TV Output) on the booster.
FM/DAB Signal Distribution
1. Connect your radio aerial downlead
(either FM or DAB) to the INPUT
socket on the booster.
2. Connect your FM radios/tuners or
your DAB radios/tuners to socket 1
on the booster.
Plug-through Aerial Signal Booster
USER GUIDE
This SLx Gold aerial signal booster is designed to
improve picture and sound quality by amplifying
weak UHF, VHF, DAB and FM radio signals.
Ready