View Menu - Slant/Fin EM-10 Operation Manual

Mode 4 and 5 – Outdoor Reset and Setpoint Operation - View Menu
View Next Item
Item
I e t m F e i d l
After the last item, the control returns to the first item in the menu.
EM-10-40 Operation and Instruction Manual
R a n g e
OUTDOOR
-60 to 190°F
Current outdoor air temperature as measured by the
(-51 to 88°C)
outdoor sensor.
BOILER TARGET
- -- ,
35 to 266°F
The boiler target is the temperature the control is
(2 to 130°C),
currently trying to maintain at the boiler supply sensor
OFF
or the boiler outlet sensor.
BOILER SUPPLY
14 to 266°F
Current boiler supply water temperature as measured
by the boiler supply sensor.
(-10 to 130°C)
Note: This item is only available when MODE is set to 5.
BOILER OUTLET
Current boiler outlet water temperature as measured
14 to 266°F
by the boiler outlet sensor.
(-10 to 130°C)
Note: When MODE is set to 5 this item is only visible
in the Factory access level.
BOILER INLET
Current boiler inlet water temperature as measured by
14 to 266°F
the boiler inlet sensor.
(-10 to 130°C)
Note: This item is only available when a boiler inlet
sensor is installed.
BOILER DELTA T
Current temperature difference between the boiler outlet
0 to 252°F
sensor and the boiler inlet sensor.
(0 to 140°C)
Note: This item is only available when a boiler inlet
sensor is installed.
BOILER ON HOURS
The total number of running hours of the boiler since
0 to 999
this item was last cleared. Clear the numbers of hours
while viewing this item.
The View menu items display current operating
temperatures and system status information.
Item button to view items in this menu.
D e s r c p i t o i n
Use the
A c c e s s
Factory
Installer
Factory
Installer
Factory
Installer
Factory
(Installer for
Mode 4)
Factory
Installer
Factory
Factory
13