Yamaha 2005 BT1100 Supplementary Service Manual page 89

ELECTRIC STARTING SYSTEM
5. Measure:
• brush length a
Out of specification
as a set.
Min. brush length
5 mm
6. Measure:
• brush spring force
Out of specification
springs as a set.
Bruch spring force
7.65
7. Check:
• gear teeth
Damage/wear
8. Check:
• oil seal
Damage/wear
part(-s).
EAS00772
Assembling the starter motor
1. Install:
• brush holder 1
NOTE:
Align the tab a on the brush holder with the slot
in the starter motor rear cover.
2. Install:
• starter motor yoke 1
• end bracket 2
• starter motor front cover 3
NOTE:
Align the projection a on the front cover with the
slot b on the end cover and starter motor yoke.
81
ELEC
¡
Replace the brushes
¡
Replace the brush
10.01 N (780 1.020 g)
¡
Replace the gear.
¡
Replace the defective